Ir direto para menu de acessibilidade.
Portal do Governo Brasileiro
Você está aqui: Página inicial > Publicações > Artigos
Início do conteúdo da página

Artigos- Ciência dos Materiais - Mestrado e Doutorado

United Kingdom flat

 

 

FOR THIS PAGE IN ENGLISH, CLICK HERE / PARA VERSÃO EM INGLÊS, CLIQUE AQUI

 

ARTIGOS DE 2010 A 2015

 

J.M. Alves, L.P.M. Brandão e A.S. Paula, The influence of sample preparation on the quantitative analysis of the volume fraction of martensite formed on a 304L trip steel, Mater. Res. 18, 159-163 (2015). DOI: 10.1590/1516-1439.347714

M.A.L. Alves, C.N. Elias, A.N. Machado e T. Wassal, Desadaptação entre implantes e pilares protéticos de zircônia, titânio e Ni-Cr, Implant News 12, 611-617 (2015).

A.R. Araujo, F.M. Margem, S.N. Monteiro, C.M.F. Vieira, B.M. Araujo e E.S. Lima, Ballistic efficiency of an individual epoxy composite reinforced with sisal fibers in multilayered armor, Mater. Res. 18, 55-62 (2015). DOI: 10.1590/1516-1439.346314

F.S. Assis, F.M. Margem, T.C. Cordeiro, A.B.S. Figueiredo, F.O. Braga e S.N. Monteiro, Photoacoustic thermal characterization of banana fibers, Mater. Res. 18, 240-245 (2015). DOI: 10.1590/1516-1439.368914

N.G. Azeredo, J. Alexandre, A.R.G. Azevedo, G.C. Xavier, V.S. Candido e S.N. Monteiro, Characterization of precursor clay body and Weibull analysis of the compressive strength of structural blocks, Mater. Sci. Forum 820, 436-442 (2015). DOI: 10.4028/www.scientific.net/MSF.820.438

N.G. Azeredo, E.B. Zanelato, J. Alexandre, A.R.G. Azevedo, G.C. Xavier, V.S. Candido e S.N. Monteiro, Performance of precursor materials and fired ceramics for structural blocks, Mater. Sci. Forum 820, 13-17 (2015). DOI: 10.4028/www.scientific.net/MSF.820.13

Azevedo, A.R.G., Alexandre, J., Zanelato, E.B., Oliveira, M.P., Souza, R.C., Xavier, G.C. e Monteiro, S.N., Characterization of a clay body used for red ceramics in São Sebastião district of Campos dos Goitacazes, state of Rio de Janeiro, Brazil, Mater. Sci. Forum 820, 8-12 (2015). DOI: 10.4028/www.scientific.net/MSF.820.8

Azevedo, A.R.G., Jonas, A., Oliveira, M.P., Souza, R.C., Zanelato, E.B. e Monteiro, S.N., Evaluation of the industrial raw material used for ceramic production in São José de Ubá, state of Rio de Janeiro, Brazil, Mater. Sci. Forum 820, 3-7 (2015). DOI: 10.4028/www.scientific.net/MSF.820.3

Botelho, R.A., Diniz, S.B., Cunha, M.A. e Brandão, L.P.M., Properties of NGO 3% silicon steel asymmetrically cold rolled, Mater. Res. 18, 143-147 (2015). DOI: 10.1590/1516-1439.352714

Cerqueira, N.A., Alexndre, J., Azevedo, A.R.G., Xavier, G.C., Candido, V.S., Vieira, C.M.F. e Monteiro, S.N., Study of a typical soil used for concrete bricks in Miracema, state of Rio de Janeiro, Brazil, Mater. Sci. Forum 820, 40-45 (2015). DOI: 10.4028/www.scientific.net/MSF.820.40

Cruz, R.B., Lima Júnior, E.P., Monteiro, S.N. e Louro, L.H.L., Giant bamboo fiber reinforced epoxy composite in multilayered ballistic armor, Mater. Res. 18, 70-75 (2015). DOI: 10.1590/1516-1439.347514 

de Biasi, R.S. e Grillo, M.L.N., Electron magnetic resonance of diluted solid solutions of Gd3+ in BaTiO3, Mater. Res. 18, 288-291 (2015). DOI: 10.1590/1516-1439.298214 

de Biasi, R.S., Lopes, R.D.S., Carvalho, D.G. e Figueiredo, A.B.S., FMR lineshape of cobalt ferrite nanoparticles, Ceram. Int. 41, 865-867 (2015). DOI: 10.1016/j.ceramint.2014.08.129

Elias, C.N., Fernandes, D.J. e Roestel, J., Resistência à compressão e fadiga de implantes dentários de titânio comercialmente puro endurecido, Implant News 12, 17-24 (2015).

Fernandes, D.J., Ruellas, A.C.O. e Elias, C.N., Influence of screw length and bone thickness on the stability of temporary implants, Materials 8, 6558-6569 (2015). DOI: 10.3390/ma8095322

Fernandes, D.J., Elias, C.N., Peres, R.V. e Mendes, A.M., Mechanical performance of nickel-titanium archwires, Mater. Res. 18, 1264-1277 (2015). DOI: 10.1590/1516-1439.003615

Fernandes, D.J., Elias, C.N. e Valiev, R.Z., Properties and performance of ultrafine grained titanium for biomedical applications, Mater. Res. 18, 1163-1175 (2015). DOI: 10.1590/1516-1439.005615

Glória G.O., Margem F.M., Ribeiro, C.G.D., Moraes, Y.M., Cruz, R.B., Silva, F.A. e Monteiro, S.N., Charpy impact tests of epoxy composites reinforced with giant bamboo fibers, Mater. Res. 18, 178-184 (2015). DOI: 10.1590/1516-1439.360614 

Hissanaga, B.M.M.S. e Brandão, L.P.M., Variáveis do processo termomecânico que influenciam a relação elástica do vergalhão CA-60, RMCT 32, 54-67 (2015).

Licurgo, J.S.C., Vieira, C.M.F., Candido, V.S. e Monteiro, S.N., Improvement of clay ceramic properties by glass polishing sludge incorporation, Mater. Sci. Forum 820, 432-437 (2015). DOI: 10.4028/www.scientific.net/MSF.820.432

Lima, E.S., Itaboray, L.M., Santos, A.P.O., Santos, C. e Cabral, R.F., Mechanical properties evaluation of Al2O3-UAG ceramic composites, Mater. Sci. Forum 820, 239-243 (2015). DOI: 10.4028/www.scientific.net/MSF.820.239

Lopes, H.P., Elias, C.N., Vieira, M.V.B., Batista, M.M.D., Lopes, W.S.P., Vieira, V.T.L. e Cunha, R.S., Evaluation of the mechanical properties of three new root canal instruments, ENDO 9, 137-142 (2015).

Lopes, F.P.D., Lu, C.H., Shiteng, Z., Monteiro, S.N. e Meyers, M.A., Room temperature dynamic strain aging in ultrafine-grained titanium, Metallurgical and Materials Transactions. A 46, 4468-4477 (2015). DOI: 10.1007/s11661-015-3061-7

Lopes, W.S.P., Lopes, H.P., Elias, C.N., Reynier, M.V. e Alves, F.R.F., Flexibility and resistance to cyclic fatigue of instruments manufactured by different methods, Dental Press Endod. 5, 13-18 (2015).

Louzada T.M., Morais, A.S.C., Vieira, C.M.F., Candido, V.S. e Monteiro, S.N., Microstructural analysis of clayey ceramics incorporated with fluorescent lamp glass waste, Mater. Sci. Forum 820, 468-473 (2015). DOI: 10.4028/www.scientific.net/MSF.820.468

Luz, F.S., Lima Jr., E.P., Louro, L.H.L. e Monteiro, S.N., Ballistic test of multilayered armor with intermediate epoxy composite reinforced with jute fabric, Mater. Res. 18, 170-177 (2015). DOI: 10.1590/1516-1439.358914

Manfro, R.C., Bortoluzzi, M.C., Fabris, V., Elias, C.N. e Araujo, V.C., Clinical evaluation of anodized surface implants submitted to a countertorque of 25 Ncm after 60 days of osseointegration: study in humans, JMOSI 14, 1-6 (2015).

Margem, J.G., Gomes, V.A., Margem, F.M., Ribeiro, C.G.D., Braga, F.O. e Monteiro, S.N., Flexural behavior of epoxy matrix composites reinforced with malva fiber, Mater. Res. 18, 114-120 (2015). DOI: 10.1590/1516-1439.359514 

Monteiro, S.N., Louro, L.H.L., Trindade, W., Elias, C.N., Ferreira, C.L., Lima, E.S., Weber, R.P., Suarez, J.C.M., Figueiredo, A.B.S., Pinheiro, W.A., Silva, L.C. e Lima Júnior, E.P., Natural curaua fiber-reinforced composites in multilayered ballistic armor, Metall. Mater. Trans. A 46, 4567-4577 (2015). DOI: 10.1007/s11661-015-3032-z

Monteiro, S.N., Lima Junior, E.P., Louro, L.H.L., Silva, L.C. e Drelich, J.W., Unlocking function of aramid fibers in multilayered ballistic armor, Metall. Mater. Trans. A 46, 37-40 (2015). DOI: 10.1007/s11661-014-2678-2

Morais, A.S.C., Louzada, T.M., Candido, V.S., Monteiro, S.N. e Vieira, C.M.F., Assessment of the technological properties of high temperature fired clayley ceramics incorporated with glass waste, Mater. Sci. Forum 820, 449-454 (2015). DOI: 10.4028/www.scientific.net/MSF.820.449

Paneto, F.J., Pereira, J.L., Lima, J.O., Jesus, E.J., Silva, L.A., Lima, E.S., Cabral, R.F. e Santos, C., Effect of porosity on hardness of Al2O3-Y3Al5O12 ceramic composite, Int. J. Refract. Met. Hard Mater. 48, 365-368 (2015). DOI: 10.1016/j.ijrmhm.2014.09.010

Pedroti L.G., Vieira, C.M.F., Alexandre, J., Xavier, G.C., Candido, V.S. e Monteiro, S.N., Granite waste from diamond wire sawing addition into concrete for civil construction, Mater. Sci. Forum 820, 503-508 (2015). DOI: 10.4028/www.scientific.net/MSF.820.503

Prates, P.B., Maliska, A.M., Ferreira, A.S., Poffo, C.M., Borges, Z.V., Lima, J.C. e de Biasi, R.S., Structural, thermal, and photoacoustic study of nanocrystalline Cr3Ge produced by mechanical alloying, J. Appl. Phys. 118, 154903-1- 154903-9 (2015). DOI: 10.1063/1.4933271

Prado da Silva, M.H., Rocha, D.N., Gobbo, L.A., Azevedo, L.M.S., Louro, L.H.L., Costa, A.M. e Campos, J.B., Synthesis of piezoelectric and bioactive NaNbO3 from metallic niobium and niobium oxide, Journal of Biomedical Materials Research. Part B, Applied Biomaterials. DOI: 10.1002/jbm.b.33453

Sigilião, L.C.F., Marquezan, M., Elias, C.N., Ruellas, A.C.O. e Sant’anna, E.F., Efficiency of different protocols for enamel clean-up after bracket debonding: an in vitro study, DPJO 20, 70-85 (2015). DOI: 10.1590/2177-6709.20.5.078-085.oar

Sousa, T.G., Diniz, S.B., Pinto, A.L. e Brandão, L.P.M., Dislocation density by x-ray diffraction in a brass deformed by rolling and ECAE, Mater. Res. 18, 246-249 (2015). DOI: 10.1590/1516-1439.369214 

Souza, F.D.M, Pedroti, L.D., Vieira, C.M.F., Monteiro, S.N., Xavier, G.C. e Candido, V.S., Pozzolanic activity of wastes from fired clay ceramic industry for incorporation into concrete, Mater. Sci. Forum 820, 515-519 (2015). DOI: 10.4028/www.scientific.net/MSF.820.515

Teles, M.C.A., Glória, G.A., Rodrigues, G.A., Netto, P.A., Margem, F.M., Braga, F.O. e Monteiro, S.N., Evaluation of the diameter influence on the tensile strength of pineapple leaf fibers (PALF) by Weibull method, Mater. Res. 18, 185-192 (2015). DOI: 10.1590/1516-1439.362514 

Valadão, P.M., Silva, F.S.P., Lima, W.B.C. e Elias, C.N., Influência da distribuição dos implantes nas deformações da mandíbula com o carregamento da infraestrutura para prótese total fixa parafusada – estudo in vitro, Implant News 12, 789-794 (2015).

Vieira, C.M.F., Candido, V.S. e Monteiro, S.N., Addition of ornamental stone waste to improve distinct formulations of clayev ceramics, Mater. Sci. Forum 820, 419-424 (2015). DOI: 10.4028/www.scientific.net/MSF.820.419

Vilani, G.N.L., Ruellas, A.C.O., Elias, C.N. e Mattos, C.T., Estabilidade de mini-implantes lisos e porosos: avaliação clínica e biomecânica – estudo in vivo, DPJO 20, 35-42 (2015). DOI: 10.1590/1807-3107BOR-2015.vol29.0023 

Vilani, G.N.L., Ruellas, A.C.O., Mattos, C.T., Fernandes, D.J. e Elias, C.N., Influence of cortical thickness on the stability of mini-implants with microthreads, Braz. oral res. 29, 1-7 (2015). DOI: 10.1590/1807-3107

Vilani, G.N.L., Ruellas, A.C.O., Elias, C.N. e Mattos, C.T., Stability of smooth and rough mini-implants: clinical and biomechanical evaluation – an in vivo study, DPJO 20, 35-42 (2015). DOI: 10.1590/2177-6709.20.5.035-042.oar

A.P. Barbosa, M.P. Oliveira, G.R. Alto, F.M. Margem e S.N. Monteiro, Charpy impact test of epoxy matrix composites reinforced with buriti fibers, Mater. Sci. Forum (online) 775-776, 296-301 (2014). DOI: 10.4028/www.scientific.net/MSF.775-776.296

A.P. Barbosa, M.P. Oliveira, G.R. Alto, F.M. Margem e S.N. Monteiro, Manufacturing of epoxy composites incorporated with buriti fibers and evaluation of thermogravimetric behavior, Mater. Sci. Forum (online) 805, 460-465 (2014). DOI: 10.4028/www.scientific.net/MSF.775-776.296

R.S. de Biasi e D.G. Carvalho, Magnetocrystalline anisotropy of NiZnFe2O4, Ceram. Int. 40, 10099-10102 (2014). DOI: 10.1016/j.ceramint.2014.03.183

R.S. de Biasi e M.L.N. Grillo, Investigation of Mn2+ Diffusion in Lime (CaO) Using Electron Magnetic Resonance, Mater. Res. 17, 434-435 (2014). DOI: 10.1590/S1516-14392014005000004

R.S. de Biasi, R.D.S. Lopes, D.G. Carvalho e A.B.S. Figueiredo, FMR lineshape of cobalt ferrite nanoparticles, Ceram. Int. 41, 865-867 (2014). DOI: 10.1016/j.ceramint.2014.08.129

M.J. Bondioli, C. Santos, K. Strecker, E.S. Lima, M.H. Prado da Silva e R.O. Magnago, Oxidation behavior of LPS-SiC ceramics sintered with AlN/Y2O3 as additive, Int. J. Refract. Met. Hard Mater. 42, 246-254 (2014). DOI: 10.1016/j.ijrmhm.2013.09.013

R.F. Cabral, L.H.L. Louro, J.B. Campos e E.S. Lima, Efeito da adição de Nb2O5 na sinterização de Al2O3-Y2O3, Matéria 19, 125-131 (2014). DOI: 10.1590/s1517-70762014000200007

V.S. Candido, M.P. Oliveira, R.A. Gouveis, A.L.B.S. Martins e S.N. Monteiro, Characterization of tensile strength dependence with diameter of sponge gourd fibers by Weibull statistical analysis, Mater. Sci. Forum (online) 775-776, 86-91 (2014). DOI: 10.4028/www.scientific.net/MSF.775-776.86

V.S. Candido, M.P. Oliveira, R.A. Gouveia, A.L.B.S. Martins e S.N. Monteiro, Weibull analysis to characterize the diameter dependence of tensile strength in sugarcane bagasse fibers, Mater. Sci. Forum (online) 775-776, 80-85 (2014). DOI: 10.4028/www.scientific.net/MSF.775-776.80

R.F.A. Cardoso, L.P.M. Brandao, M.A. Cunha, C.H.P. Paiva, J.R.L. Amaro, L.T. Faria, L.R.O. Rosa, R.P. Garcia Jr., T.A. Saldanha e V.H.G. Bezerra, Evaluation of the Relationship between crytallographic texture and magnetic properties through the magnetocrystalline anisotropy coefficient, Mater. Sci. Forum (online) 775-776, 427-430 (2014). DOI: 10.4028/www.scientific.net/MSF.775-776.427

M.E. R. Coimbra, M.G. Bernardes, C.N. Elias e P.G.G.G. Coelho, In vitro degradation of poly-l-dl-lactic acid (PLDLLA) after two processing methods, IJET 20, 45-64 (2014). DOI: 10.4028/www.scientific.net/JBBBE.20.45

L.R.O. Cruz, J.A.S. Fernandes, C.L. Ferreira e W.A. Pinheiro, Microstructural and optical properties of CSS and CBD-CDS thin films for photovoltaic solar cells, Materia 19, 228-234 (2014). DOI: 10.1590/S1517-70762014000300006 

R.C. Cuozzo, M.H.M.R. Leao, L.A. Gobbo, D.N. Rocha, N.M. E. Ayada, W. Trindade, A. M. Costa e M. H. Prado da Silva, Zinc alginatehydroxyapatite composite microspheres for bone repair, Ceram. Int. 40, 11369-11375 (2014). DOI: 10.1016/j.ceramint.2014.02.107

G. De-Deus, V.T.L. Vieira, E.J.N. Silva, H.P. Lopes, C.N. Elias e E.J.L. Moreira, Bending resistance and dynamic and static cyclic fatigue life of Reciproc and WaveOne Large Instruments, J. Edodon. 40, 575-579 (2014). DOI: 10.1016/j.joen.2013.10.013

C.N. Elias, H.P. Lopes, M.V.B. Vieira, L.C. Souza e V.T. Vieira, Influence of surface morphology on the torsion fracture of NiTi endodontic instruments, J. Mater. Eng. Perform. 26, 1-6 (2014). DOI: 10.1007/s11665-014-1043-3

C.N. Elias, A.M. Melo e H.E.S Santos, Degradation and mechanical properties of zirconia 3-unit fixed dental prostheses machined on a CAD/CAM system, Int. J. Appl. Ceram. Technol., 11, 513/523 (2014). DOI: 10.1111/ijac.12118

C.N. Elias, D.J. Fernandes, C.R.S. Resende e J. Roestel, Mechanical properties, surface morphology and stability of a modified commercially pure high strength titanium alloy for dental implants, Dent. Mater. 31, e1-e13 (2015). DOI: 10.1016/j.dental.2014.10.002

E.S. Lima, A.P.O. Santos, L.M. Itaboray, C. Santos e R.F. Cabral, Development and Characterization of the Al2O3-YAG ceramic composites, Mater. Sci. Forum (online) 798-799, 383-388 (2014). DOI: 10.4028/www.scientific.net/MSF.798-799.383

V.S. Lima e C.N. Elias, Parâmetros físicos e mecânicos que influenciam o aquecimento durante a oesteotomia para implantes dentários, Implant News 11, 161-168 (2014).

H.P. Lopes, M.V.B. Vieira, C.N. Elias, J.F. Siqueira Jr., V.T.L. Vieira, M.M.D. Batista, M.A.S. Neves, E.S. Paiva, C.B. Paula e R.G. Soares, Torsional resistance and toughness of two nickel-titanium instruments: Reciproc versus Waveone, ENDO 8, 1-6 (2014).

W.S.P. Lopes, H.P. Lopes, C.N. Elias, M.V. Reynier, M.M.D. Batista e R.S. Cunha, Resistance to bending and buckling of Waveone and Reciproc instruments, ENDO 8, 153-156 (2014).

A.L.B.S. Martins, R.A. Gouvea, M.P. Oliveira, V.S. Candido e S.N. Monteiro, Characterization of epoxy matrix composites incorporated with sugarcane bagasse fibers, Mater. Sci. Forum (online) 775-776, 319-324. DOI: 10.4028/www.scientific.net/MSF.775-776.102

J.E. May, T.P. Busquim, C.N. Elias, B.J.S. Oliveira, M. Gaboardi e C.R. Ribeiro, Physiological bone loading in the human head and prosthesis size estimation, IJET 14, 130-134 (2014).

D. Mints, C.N. Elias, P. Funkenbusch e L. Meirelles, Integrity of implant surface modifications after insertion, JOMI 29, 97-104 (2014). DOI: 10.11607/jomi.3259

S.N. Monteiro, F.M. Margem, I.L. Silva, A. Bevitori e M.P. Oliveira, Bending mechanical behavior of epoxy matrix reinforced with jute fiber, Mater. Sci. Forum (online) 775-776, 314-318. DOI: 10.4028/www.scientific.net/MSF.775-776.314

S.N. Monteiro, F.M. Margem, R.L. Loiola, F.S. Assis e M.C. Oliveira, Characterization of banana fibers functional groups by infrared spectroscopy, Mater. Sci. Forum (online) 775-776, 250-254 (2014). DOI: 10.4028/www.scientific.net/MSF.775-776.250

S.N. Monteiro, F.M. Margem, T.S. Noan, R.L. Loiola e M.C. Oliveira, Characterization of curaua fibers by infrared spectroscopy, Mater. Sci. Forum (online) 775-776, 325-329 (2014). DOI: 10.4028/www.scientific.net/MSF.775-776.325

S.N. Monteiro, F.M. Margem, A.C. Pereira, N. Simonassi e M.P. Oliveira, Charpy impact tests in epoxy matrix composites reinforced with continuous sisal fiber, Mater. Sci. Forum (online) 775-776, 290-295 (2014). DOI: 10.4028/www.scientific.net/MSF.775-776.290

S.N. Monteiro, F.M. Margem, H.P.G. Santaf Jr., L.B.S. Martins e M.P. Oliveira, Correlation between the diameter and the density of coir fiber using the Weibull statistic methodology, Mater. Sci. Forum (online) 775-776, 266-271 (2014). DOI: 10.4028/www.scientific.net/MSF.775-776.266

S.N. Monteiro, F.M. Margem, L.B.S. Martins, R.L. Loiola e M.C. Oliveira, Dynamic-mechanical analysis of polyester composites reinforced with giant bamboo dencrocalmus giganteus fiber, Mater. Sci. Forum (online) 775-776, 302-307 (2014). DOI: 10.4028/www.scientific.net/MSF.775-776.302

S.N. Monteiro, F.M. Margem, J.I. Margem, L.B.S. Martins, C.G. Oliveira e M.P. Oliveira, Dynamic-mechanical behavior of malva fiber reinforced polyester matrix composites, Mater. Sci. Forum (online) 775-776, 278-283 (2014). DOI: 10.4028/www.scientific.net/MSF.775-776.278

S.N. Monteiro, F.M. Margem, J.I. Margem, L.B.S. Martins, C.G. Oliveira e M.P. Oliveira, Infra-red spectroscopy analysis of malva fibers, Mater. Sci. Forum (online) 775-776, 255-260 (2014). DOI: 10.4028/www.scientific.net/MSF.775-776.255

S.N. Monteiro, F.M. Margem, F.S. Assis, R.L. Loiola e M.P. Oliveira, Izod impact tests in polyester matrix composites reinforced with banana fibers, Mater. Sci. Forum (online) 775-776, 261-265 (2014). DOI: 10.4028/www.scientific.net/MSF.775-776.261

S.N. Monteiro, F.M. Margem, M.P. Oliveira e G.R. Alto, Izod impact tests in polyester matrix composites reinforced with buriti fibers, Mater. Sci. Forum (online) 775-776, 330-335 (2014). DOI: 10.4028/www.scientific.net/MSF.775-776.330

S.N. Monteiro, F.M. Margem, W.P. Inacio, A.C. Pereira e M.P. Oliveira, Tensile properties of epoxy composites reinforced with continuous sisal fibers, Mater. Sci. Forum (online) 775-776, 284-289 (2014). DOI: 10.4028/www.scientific.net/MSF.775-776.284

S.N. Monteiro, F.M. Margem, G.R. Alto, R.L. Loiola e M.P. Oliveira, Tensile strength of polyester composites reinforced with thinner burity fibers, Mater. Sci. Forum (online) 775-776, 183-188 (2014). DOI: 10.4028/www.scientific.net/MSF.775-776.183

S.N. Monteiro, F.M. Margem, L.B.S. Martins, R.L. Loiola e M.P. Oliveira, Tensile strength of polyester matrix composites reinforced with giant bamboo (Dendrocalamus giganteus) fibers, Mater. Sci. Forum (online) 775-776, 308-313. DOI: 10.4028/www.scientific.net/MSF.775-776.308

S.N. Monteiro, F.M. Margem, A.B. Bevitori, I.L.A. Silva e M.P. Oliveira, Thermal characterization of polyester composites reinforced with ramie fibers, Mater. Sci. Forum (online) 308-313, 272-277 (2014). DOI: 10.4028/www.scientific.net/MSF.775-776.272

S.N. Monteiro, E.P.L. Junior, L.H.L. Louro, L.C. Silva e J.W. Drelich, Unlocking function of aramic fibers in mutilayered ballistic armor, Metall. Mater. Trans. A 46, 37-40 (2014).

P.G. Paula, R.J.S. Rodriguez, V.S. Candido e S.N. Monteiro, Formulation and characterization of polypropylene composites alkali treated bagasse fiber, Mater. Sci. Forum (online) 775-776, 642-647 (2014). DOI: 10.4028/www.scientific.net/MSF.775-776.642

E.C. Pereira, L.A. Matlakhova, C.Y. Shingue e S.N. Monteiro, Physical and structural characterization of a monocrystallineCu-13.7Al-4.2Ni alloy subjected to thermal cycling treatments, Metall. Mater. Trans. A 45, 1866-1875 (2014).

M.H. Prado da Silva, F.N. Moura, D.N. Rocha, L.A. Gobbo, A.M. Costa e L.H.L. Louro, Zinc-modified hydroxyapatite coatings obtained from parascholzite alkali conversion, Surf. Coat. Technol. 249, 109-117 (2014). DOI: 10.1016/j.surfcoat.2014.03.052

D.N. Rocha, L.R.O. Cruz, J.L. Prado Neto, N.M.E. Ayad, L.A. Gobbo e M.H. Prado da Silva, Production and Characterization of Hydroxyapatite/Niobo Phosphate Glass Scaffold, Key Eng. Mater. 587, 128-131 (2014).

J.M. Rocha, M.A. Gravina, M.J.S. Campos, C.C.A. Quintao, C.N. Elias e R.W.F. Vitral, Shear bond resistance and enamel surface comparison after the bomding and debonding o ceramic and metallic brackets, Dental Press J. Orthod.19, 77-85 (2014). DOI: 10.1590/2176-9451.19.1.077-085.oar 

H.E.S. Santos, C.N. Elias, C. Santos e C.R.S. Resende, Caracterizacao da Zircônia Policristalina Estabilizada por Ítria por Difração de Raios X, RMCT 31(1), 41-57 (2014).

R.F. Santos, A.C.O. Ruellas, D.J. Fernandes e C.N. Elias, Torques de inserção versus resistência mecânica de mini-implantes inseridos em corticais de diferentes espessuras, Dental Press J. Orthod 19, 90-94 (2014). DOI: 10.1590/2176-9451.19.3.090-094.oar

N.A. Sardinha e L.P.M. Brandao, Comparação da textura cristalográfica de um aco IF após laminação convencional e assimétrica, RMCT 31(1), 30-40 (2014).

T.B. Skaf, L.H.L. Louro, A.L.V. Cardoso, A.V. Gomes e M.H. Prado da Silva, Effect of LiF and CaO additions on MgAl2O4 Dynamic Behavior, Mater. Sci. Forum (online) 798-799, 195-198 (2014). DOI: 10.4028/www.scientific.net/MSF.798-799.195

W. Trindade, M.H. Prado da Silva, A.V. Gomes, C.F.M. Chagas, L.H.L. Louro e J.B. Campos, Comparative study of solid-phase and liquid-phase assisted sintering of Nb2O5-doped alumina, Mater. Sci. Forum (online) 798-799, 691-695 (2014). DOI: 10.4028/www.scientific.net/MSF.798-799.691

W. Trindade, M.H. Prado da Silva, A.V. Gomes, C.F.M. Chagas e L.H.L. Louro, Effect of milling medium on alumina additivated with niobia, Mater. Sci. Forum (online) 798-799, 677-681 (2014). DOI: 10.4028/www.scientific.net/MSF.798-799.677

W. Trindade, M.H. Prado da Silva, A.V. Gomes, J.B. Campos e L.H.L. Louro, Processing and properties of niobia-doped alumina sintered at 1400 oC, Mater. Sci. Forum (online) 798-799, 665-670 (2014). DOI: 10.4028/www.scientific.net/MSF.798-799.665

G.D.C. Antolina, L.R. Cruz e R.R. Avillez, Formação da Liga CdSxTe1-x em Células Solares de CdS/CdTe Submetidas a Tratamento Térmico com CdCl2, RMCT 30(2), 20-31 (2013).

R.S. de Biasi e M.L.N. Grillo, Measurement of small concentrations of manganese in cadmium oxide (CdO) using electron magnetic resonance, Ceram. Int. 39, 2171-2173 (2013). DOI: 10.1016/j.ceramint.2012.07.102

L.R. Cruz, W.A. Pinheiro, R.A. Medeiro, C.L. Ferreira, R.G. Dhere e J.N. Duenow, Influence of heat treatment and back contact processing on the performance of CdS/CdTe thin film solar cells produced in a CSS in-line system, Vacuum 87, 45-49 (2013). DOI: 10.1016/j.vacuum.2012.06.014

E.S. Lima, L.H.L. Louro, R.F. Cabral, J.B. Campos, R.R. Avillez e C.A. Costa, Processing and characterization of Al2O3-yttriun aluminum garnet powders, J. Mater. Res. Technol. 2(1), 18-23 (2013). DOI: 10.1016/j.jmrt.2013.03.004

J.C. de Lima, C.M. Poffo, S.M. Souza, K.D. Machado, D.M. Trichês, T.A. Grandi e R.S. de Biasi, Modeling the amorphous structure of mechanically alloyed Ti50Ni25Cu25 using anomalous wide-angle x-ray scattering and reverse Monte Carlo Simulation, Physica B 424, 60-68 (2013). DOI: 10.1016/j.physb.2013.05.001

R. Martinez, J.C. Escobedo, D.A. Cortés, G.G. Alves, A.B.R. Linhares, J.M. Granjeiro, M.H. Prado da Silva, J.C. Ortiz, J.M. Almanza e E.M. Múzquiz-Ramos, In vitro bioactivity and biocompatibility of a Co-Cr-Mo alloy after heat treatment in contact with different bioactive systems, Ceram. Int. 39, 2003-2011 (2013). DOI: 10.1016/j.ceramint.2012.08.052

D.A.O. Miranda, T.C. Mendes, R.B. Consolaro, C.E. Francischone e C.N. Elias, Forma dos Implantes, in Reabilitação Oral com Implantes Osseointegrados, Editora Napoleão, São Paulo, 2013, p. 26-51.

S.N. Monteiro, F.P.D. Lopes, D.C.O. Nascimento, A.S. Ferreira e K.G. Satyanarayana, Processing and properties of continuous and aligned curaua fibers incorporated polyester composites, J. Mater. Res. Technol. 2(1), 2-9 (2013). DOI: 10.1016/j.jmrt.2013.03.005

S.N. Monteiro, A.L.D. Skury, M.G. Azevedo e G.S. Bobravnitchii, Cubic boron nitride competing with diamond as a superhard engineering material - an overview, J. Mater. Res. Technol. 2(1), 68-74 (2013). DOI: 10.1016/j.jmrt.2013.03.012

C.M. Poffo, J.C. de Lima, S.M. Souza, D.M. Trichês, T.A. Grandi e R.S. de Biasi, Structural, thermal, optical and photoacoustic study of nanostructured FeSb2 prepared by mechanical alloying, Physica B 413, 47-54 (2013). DOI: 10.1016/j.physb.2012.12.037

D.N. Rocha, L.A. Gobbo e M.H. Prado da Silva, Production and characterization of niobate apatite, J. Mater. Res. Technol. 2(1), 24-29 (2013). DOI: 10.1016/j.jmrt.2013.03.006

A.C.O. Ruellas e C.N. Elias, Princípios básicos de biomecânica aplicada na ortodontia, in Biomecânica Aplicada à Clínica, Editora Dental Press, Maringá, 2013, p. 21-33.

C.M.F. Vieira, R. Sanchez, S.N. Monteiro, N. Lalla e N. Quaranta, Recycling of electric arc furnace dust into red ceramic, J. Mater. Res. Technol. 2(2), 88-92 (2013). DOI: 10.1016/j.jmrt.2012.09.001

C.M.F. Vieira, S. Paciornik e S.N. Monteiro, Computer controlled digital microscopy - Wide area characterization of waste incorporated clay ceramics, J. Mater. Res. Technol. 2(2), 202-204 (2013). DOI: 10.1016/j.jmrt.2013.02.007

R.P. Weber, K.K. Chawla e J.C. Miguez Suarez, Influence of notch orientation and temperature on the impact behavior of a dual hardness steel composite, Mater. Sci. Eng. A 580, 279-287 (2013). DOI: 10.1016/j.msea.2013.05.026

E.C. Amaral, L.P.M. Brandão e C.R. Maria, Influência dos parâmetros de pulso na soldagem de ligas de alumínio, Anais do 20o CBECIMAT, Joinville, 2012, p. 7882.

N.M.E. Ayad, A.C.M. Cardoso, P.L.B. dos Santos, M.L. Assunção, L.L. da Rocha, V.G. Pereira, R.P. Weber e J.C.M. Suarez, Influência da degradação ambiental no desempenho de biomateriais poliméricos, Anais do 20o CBECIMAT, Joinville, 2012, p. 9744-9751 (2012).

R.S. de Biasi e M.L.N. Grillo, Electron magnetic resonance of gadolinium-doped calcium fluoride, Physica B 407, 2164-2168 (2012). DOI: 10.1016/j.physb.2012.02.032

R.S. de Biasi e M.L.N. Grillo, Influence of Chromium Concentration on the Electron Magnetic Resonance Linewidth of Cr3+ in SrTiO3, Mater. Res. 15, 473-476 (2012). DOI: 10.1590/S1516-14392012005000053

R.S. de Biasi e L.H.G. Cardoso, A simple model for the magnetocrystalline anisotropy in mixed ferrite nanoparticles, Physica B 407, 3893-3896 (2012). DOI: 10.1016/j.physb.2012.06.017

R.A. Botelho, L.P.M. Brandão, M.A. Cunha e S.C. Paolinelli, Efeito de laminações assimétricas e convencionais com recozimento intermediário na textura cristalográfica de aço silício gno com 3% Si, Anais do 20o CBECIMAT, Joinville, 2012, p. 8850.

T.P. Busquim, S.E. Kuri, C.N. Elias, J.H.C. Lima e C.A. Muller, Caracterização dos óxidos de Ti das superfícies de implantes dentários com diferentes tratamentos, Implant News 9, 207-214 (2012).

R. Buzzoni, C.N. Elias, D.J. Fernandes e J.A.M. Miguel, Avaiação da fricção superficial apresentada por braquetes autoligáveis em condições de tracionamento sob angulação, Dental Press J. Orthod. 17, 51-56 (2012). DOI: 10.1590/S2176-94512012000400013

R.F. Cabral, L.H.L. Louro, M.H. Prado da Silva, J.B. Campos e E.S. Lima, Síntese e caracterização do compósito Al2O3-YAG sem aditivação e Al2O3-YAG e Al2O3 aditivados com Nb2O5, Cerâmica 58, 14-19 (2012). DOI: 10.1590/S0366-69132012000100004

R.F. Cabral, M.H. Prado da Silva, J.B. Campos e E.S. Lima, Study of the Sintering of Mixtures Al2O3-Nb2O5 and Y2O3-Nb2O5, Mater. Sci. Forum 727-728, 799-803 (2012). DOI: 10.4028/www.scientific.net/MSF.727-728.799

R.F. Cabral. M.H. Prado da Silva e E.S. Lima, Sinterização do Compósito Al2O3-YAG com Aditivação do Nb2O5, RMCT 29(1), 3-9 (2012).

R.F.A. Cardoso, C.H.P. Paiva, J.R.L. Amaro, L.S. Teles, R.L.O. Rosa, R.P. Garcia Jr., T.A. Saldanha, V.H.G. Bezerra e L.P.M. Brandão, Avaliação da relação entre textura e propriedades magnéticas através do coeficiente de anisotropia magnetocristalina, Anais do 20o CBECIMAT, Joinville, 2012, p. 8082-8089.

M.V.P. Companhoni, J.R.G. Matheus, T.L. Marcondes e A.L. Pinto, Analysis of microstructure and microhardness of Zr-2.5Nb processed by High-Pressure Torsion (HPT), J. Mater. Sci. 47, 7835-7840 (2012). DOI: 10.1007/s10853-012-6454-7

L.R. Cruz e Q.G.S. San Miguel, Propriedades óticas e microestruturais de filmes finos eletrodepositados de CdTe, Matéria 17, 961-972 (2012). DOI: 10.1590/S1517-70762012000200003 

C.N. Elias, Requisitos gerais para implantes odontológicos osseointegráveis, Implant News 9, 79-86 (2012).

C.N. Elias, A.M. Melo e C. Santos, Influence of CAD/CAM Grinding in the Performance of Sintered Dental Zirconia, Mater. Sci. Forum 727-728, 1081-1083 (2012). DOI: 10.4028/www.scientific.net/MSF.727-728.1081

C.N. Elias, P.A. Gravina, F. Costa e Silva Filho e P.A.P. Nascente, Preparation of Bioactive Titanium Surfaces via Fluoride and Fibronectin Retention, Int. J. Biomater. 2012, PMC3503304 (2012). DOI: 10.1155/2012/290179

C.N. Elias, F.A. Rocha e A.L. Nascimento, Influence of implant shape, surface morphology, surgical technique and bone quality on the primary stability of dental implants, J. Mech. Behav. Biomed. Mater. 16, 169-180 (2012). DOI: 10.1016/j.jmbbm.2012.10.010

C.N. Elias, A.C.O. Ruellas e D.J. Fernandes, Orthodontic Implants: Concepts for the Orthodontic Practitioner, Int. J. Dent. 2012, 549761 (2012). DOI: 10.1155/2012/549761

A. Elzubair e J.C.M. Suarez, Mechanical behavior of recycled polyethylene/piassava fiber composites, Mater. Sci. Eng., A 557, 29-35 (2012). DOI: 10.1016/j.msea.2012.06.051

T.J. Fernandes, F.M. Oliveira, E.V.O. Tude e M.H. Prado da Silva, Caracterização físico-qímica da associação da hidroxiapatita nanométrica à albumina bovina (BSA), RMCT 29(1), 20-30 (2012).

B.C.F. Guedes, L.H. Almeida, D.S. Santos e L.P.M. Brandão, Processamento termomecânico e textura cristalográfica de uma liga Zr-Nb, Anais do 20o CBECIMAT, Joinville, 2012, p. 8569-8577.

A. Hannickel, M.H. Prado da Silva, H.L. Barros e M.P. Albuquerque, Image J como ferramenta para medida da área de partículas de magnetita em três escalas nanométricas, RMCT 29(4), 16-26 (2012).

M. Hiroce, D.J. Fernandes, C.N. Elias e J.A.M. Miguel, Sliding resistance of polycarbonate self-ligating brackets and stainless steel esthetic archwires, Prog. Orthod. 13, 148-153 (2012). DOI: 10.1016/j.pio.2011.10.004

M.L.F.M. Kede, E. Mavropoulos, N.C.C. Rocha, A.M. Costa, M.H. Prado da Silca, J.C. Moreira e A.M. Rossi, Polymeric sponges coated with hydroxyapatite for metal immobilization, Surf. Coat. Technol. 206, 2810-2816 (2012). DOI: 10.1016/j.surfcoat.2011.11.044

V.L.C. Lapa, L.L.Y. Visconte, J.C.M. Suarez, M.P.O. Sena e R.C.R. Nunes, Caracterização dinâmico-mecânica e óptica de composições de borracha nitrílica contendo nitrocelulose, Anais do 7o Encontro Técnico de Materiais e Química, Rio de Janeiro, 2012, ETQM 150713 (CD-ROM). (4 páginas).

R.B. Lehmann, C.N. Elias e M.A. Zucareli, Influência de conexão interna, plataforma e direção de carregamento nas tensões em implantes tipo morse, Implant News 9, 241-246, 2012.

R. B. Lehmann, C.N. Elias e M.A. Zucareli, Influência da geometria externa do implante dentário tipo Morse na distribuição de tensão, Dental Press Implant. 6, 35-43 (2012).

A.C. Lima, S.N. Monteiro e K.G. Satyanarayana, Recycled Polyethylene Composites Reinforced with Jute Fabric from Sackcloth: Part I-Preparation and Preliminary Assessment, J. Polym. Environ. 20, 245-253 (2012). DOI: 10.1007/s10924-011-0373-6

E.S. Lima, L.H.L. Louro, J.B. Campos. R.R. Avillez, S.N. Monteiro e C.A. Costa, Processing and Characterization of Al2O3-YAG Composite, Mater. Sci. Forum 1334-1339 (2012). DOI: 10.1016/j.jmrt.2013.03.005

E.S. Lima, R.F. Cabral, L.H.L. Louro, M.H. Prado da Silva e J.B. Campos, Formação do compósito bifásico Al2O3-YAG aditivado com Nb2O5, RMCT 29(2), 3-9 (2012).

H.P. Lopes, C.N. Elias, M. Mangelli, W.S. Lopes, G. Amaral, L.C. Souza e J. F. Siqueira Jr., Buckling resistance of pathfinding endodontic instruments, J. Endod. 38, 402-404 (2012). DOI: 10.1016/j.joen.2011.10.029

H.P. Lopes, C.N. Elias, J.F. Siqueira Jr., R.G. Soares, L.C. Souza, J.C.M. Oliveira, W.S.P. Lopes e M. Mangelli, Mechanical Behavior of Pathfinding Endodontic Instruments, J. Endod. 38, 1417-1421 (2012). DOI: 10.1016/j.joen.2012.05.005. Epub 2012 Jun 29

H.P. Lopes, C.N. Elias, F.R. Alves e M.N. Maia, Thermal behavior of conventional and thermoplastic gutta-percha cones, Endodontology 24, 5-9 (2012).

L.G.A. Melo e C. Thaumaturgo, Filito: um material estratégico para fabricação de novos cimentos, RMCT 29(2), 10-24 (2012).

R.L.S.B. Marçal, M.H. Prado da Silva, E.S. Lima e L.H.L. Louro, Production of Borosilicate Glasses from Residues of Ornamental Rocks, Mater. Sci. Forum 727-728, 629-633 (2012). DOI: 10.4028/www.scientific.net/MSF.727-728.629

M.M. Martins, M.A.O. Almeida, C.N. Elias e A.M. Mendes, Bleaching effects on shear bond strengths of orthodontic brackets, Prog. Orthod. 13, 23-29 (2012). DOI: 10.1016/j.pio.2011.05.001

C.Q. Miguez, R.P. Weber, A. Rodolfo Jr. e J.C.M. Suarez, Influência do intemperismo no desempenho mecânico de um composto de PVC, Anais do 20o CBECIMAT, Joinville, 2012, p. 10547-10554.

C.Q. Miguez, R.P. Weber e J.C.M. Suarez, Aplicação do poli(cloreto de vinila) (PVC) na construção civil: pisos em unidades hospitalares, Anais do 4o Congresso Anual da ABDEH, São Paulo, 2012 (6 páginas).

A.C. Miranda, S.N. Monteiro e K.G. Satyanarayana, Recycled Poliethylene Composites Reinforced with Jute Fabric from Sackcloth: Part I - Preparation and Preliminary Assessment, J. Polym. Environ. 20, 245-253 (2012). DOI: 10.1007/s10924-011-0373-6

P.S. Miranda, L.P.M. Brandão e M.A. Cunha, O efeito de envelhecimento entre passes sobre a evolução microestrutural do aço silício HGO 3% Si no recozimento da descarbonetação, Anais do 20o CBECIMAT, Joinville, 2012, p. 6334.

S.N. Monteiro, F.P.D. Lopes, E.A. Carvalho e C.N. Elias, Anomalous Strain Rate Effect in Ultrafine Grained Titanium, J. Mater. Res. Technol. 1, 200-202 (2012). DOI: 10.1016/S2238-7854(12)70033-9

S.N. Monteiro, V. Calado, F.M. Margem e R.J.S. Rodriguez, Thermogravimetric Stability of Less Common Lignocellulosic Fibers - A Review, J. Mater. Res. Technol. 1, 189-199 (2012). DOI: 10.1016/S2238-7854(12)70032-7

S.N. Monteiro, V. Calado, R.J.S. Rodriguez e F.M. Margem, Thermogravimetric Stability of Polymer Composites Reinforced with Less Common Lignocellulosic Fibers - an Overview, J. Mater. Res. Technol. 1, 117-126 (2012). DOI: 10.1016/S2238-7854(12)70021-2

S.N. Monteiro, V. Calado, R.J.S. Rodriguez e F.M. Margem, Thermogravimetric behavior of natural fibers reinforced polymer composites - An overview, Mater. Sci. Eng., A 557, 17-28 (2012). DOI: 10.1016/j.msea.2012.05.109

D.C.O. Nascimento, A.S. Ferreira, S.N. Monteiro, R.C.M.P. Aquino e K.G. Satyanarayana, Studies on the characterization of piassava fibers and their epoxy composites, Composites Part A 43, 353-362 (2012). DOI: 10.1016/j.compositesa.2011.12.004

A.L.N. Oliveira, C.N. Elias e J.H.C. Lima, Variação da estabilidade primária de implantes osseointegráveis em função da estabilidade da cortical, RMCT 29(1), 48-56 (2012).

V.L.F.P. Oliveira, M.H. Prado da Silva, E.S. Lima, C. Santos e L.H.L. Louro, Effect of Glassy Phase Additions to Zirconia on its Sintering Behavior and Microstructure, Mater. Sci. Forum 727-728, 935-939 (2012). DOI: 10.4028/www.scientific.net/MSF.727-728.935

V.L.F.P. Oliveira, M.H. Prado da Silva, E.S. Lima, C. Santos e L.H.L. Louro, Effect of Glassy Phase Additions to Zirconia on its Mechanical Properties, Mater. Sci. Forum 727-728, 940-944 (2012). DOI: 10.4028/www.scientific.net/MSF.727-728.940

L.E.S.C. Pinto e M.H. Prado da Silva, Caracterização microestrutural da hidroxiapatita bovina sinterizada com biovidro niobo-fosfato, RMCT 29(3), 18-27 (2012).

J.F. Pires, B.F.C. Patricio, M.S. Albernaz, G.D. Mendonça, B.F. Coelho, G. Weissmuller, C.N. Elias e R. Santos-Oliveira, Preparation of Biodegradable Poly(L-Lactide) (PLA) Nanoparticles Containing DMSA (Dimercaptosuccinic Acid) as Novel Radiopharmaceutical, Adv. Sci. Lett. 10, 143-145 (2012).

A.A. Ribeiro, C.T. Mattos, A.C. Ruellas, M.T. Araujo e C.N. Elias, In vivo comparison of the friction forces in new and used brackets, Orthodontics 13, e44-e50 (2012).

D.N. Rocha, M.H. Prado da Silva e L.A. Gobbo, Produção de hidroxiapatita parcialmente substituída com nióbio, RMCT 29(3), 11-17 (2012).

A.C.O. Ruellas, C.T. Mattos e C.N. Elias, Avaliação dos torques de inserção e remoção e da resistência mecânica de novos mini-implantes ortodônticos, Ortho Sci., Orthod. Sci. Pract. 5, 23-27 (2012).

A.C.O. Ruellas, C.T. Mattos e C.N. Elias, Controle mecânico durante retração de dentes anteriores usando mini-implantes ortodônticos como ancoragem, Ortho Sci., Orthod. Sci. Pract. 5, 301-309 (2012).

A.I.L. Santana, G.A.C. Branco, C.M.B. Bacaltchuk, D.S. Santos e L.P.M. Brandão, Textura cristalográfica de um tubo de liga de zircônio produzido por laminação a frio, Anais do 20o CBECIMAT, Joinville, 2012, p. 6627-6634.

C. Santos, C.N. Elias, A.M. Melo e S.N. Monteiro, Zirconia Blocks Properties Used for CAD/CAM Dentistry Restorations, Mater. Sci. Forum (online) 727-728, 804-808 (2012). DOI: 10.4028/www.scientific.net/MSF.727-728.804

S.A.S. Santos, E.S. Lima, L.H.L. Louro e C.A.C. Neto, Synthesis of Powders Nanometer Al2O3 by Sol-Gel, Mater. Sci. Forum (online) 727-728, 9-13 (2012). DOI: 10.4028/www.scientific.net/MSF.727-728.9

S.A.S. Santos, E.S. Lima, L.H.L. Louro, C.A.C. Neto e R.R. Avillez, Al2O3-YAG production by sol-gel-method, Anais do 20o CBECIMAT, Joinville, 2012, p. 269-275.

V. Scarpini, R.M. Pinheiro, S.N. Monteiro e C.M.F. Vieira, Effect of the Dry Bulk Density on the Fired Properties of Clayey Ceramics, Mater. Sci. Forum 727-728, 988-992 (2012). DOI: 10.4028/www.scientific.net/MSF.727-728.988

J.D.C.B.K.F. Silva, F.S. Oliveira, I.C. Abud e C.N. Elias, Estudo das propriedades mecânicas de implantes mamários de silicone, Anais do 20o CBECIMAT, Joinville, 2012, p. 11682-11689.

S.M.L. Silva e C.L. Ferreira, Filme fino de Fe-Cr-Al: análise experimental de interações com microondas, morfologia e microestrutura, RMCT 29(4), 27-37 (2012).

J.F. Siqueira Jr., C.N. Elias, I.N. Rôças, F.R.F. Alves, J.C.M. Oliveira, L. Armada e J.C. Provenzano, Princípios biológicos do tratamento endodôntico de dentes com polpa necrosada e tensão perirradicular, Rev. Bras. Odont. 69, 8-14 (2012). DOI: 10.18363/rbo.v69n1.p.08

T.B. Skaf, L.H.L. Louro, M.H. Prado da Silva e A.L.V. Cardoso, Effect of LiF and CaO additions to MgAl2O4 on densification under hot pressing, Anais do 20o CBECIMAT, Joinville, 2012, p. 2123-2130.

C.F.P.P. Vivacqua, Propriedades mecânicas em flexão do osso cortical bovino, RMCT 29(2), 23-30 (2012).

R.P. Weber e J.C.M. Suarez, Avaliação do desempenho de um compósito epóxi/fibra de vidro: efeito da energia de impacto balístico, Anais do 20o CBECIMAT, Joinville, 2012, p. 2469-2475.

A.M.B. Bandeira, M.P.A. Santos, G. Pulitini, C.N. Elias e M.F. Costa, Influence of thermal degradation on the frictional force of an experimental coated NiTi wire, Angle Orthod. 81, 484-489 (2011). DOI: 10.2319/042810-232.1. Epub 2011 Feb 7

R.S. de Biasi e M.L.N. Grillo, Electron magnetic resonance of diluted solid solutions of Gd3+ in SrTiO3, Mater. Chem. Phys, 130, 409-412 (2011). DOI: 10.1016/j.matchemphys.2011.07.002

R.S. de Biasi e M.L.N. Grillo, Electron magnetic resonance investigation of gadolinium diffusion in zircon powders, J. Phys. Chem. Solids 72, 1390-1391 (2011). DOI: 10.1016/j.jpcs.2011.08.014

A.M. Costa, E. Mavropoulos, A. Mello, E.A. dos Santos, R.R. de Oliveira, M.H. Prado da Silva e A.M. Rossi, Spectroscopic Studies of Adsorbed Myoglobin on Hydroxyapatite Surface, Key Eng. Mater. 493-494, 504-507 (2011). DOI: 10.4028/www.scientific.net/KEM.493-494.504

C.N. Elias, F.A. Rocha e M.V. Santos, Influência do tratamento de superfície na estabilidade primária, molhabilidade e integração de implantes, Implant News 8, 14-21 (2011).

C.N. Elias, P.A. Gravina, T.P. Busquim, S.E. Kuri e F.C.S. Filho, Biomimetização da superfície de implantes dentários, Implant News 8, 47-55 (2011).

C.N. Elias, A.C.O. Ruellas e E.C. Marins, Resistência mecânica e aplicações clínicas de mini-implantes ortodônticos, Rev. Bras. Odont. 68, 95-100 (2011). DOI: 10.18363/rbo.v68n1.p.95

R.S. Faeda, R. Spin-Netto, R. Sartori, M.R. Costa, R.J.B. Netto, E. Marcantonio, C.N. Elias e E. Marcantonio Jr., Osseointegração de implantes tratados com ácidos e anodizados: estudo biomecânico em coelhos, Implant News 8, 109-114 (2011).

D.J. Fernandes, G.M. Abrahão, C.N. Elias e A.M. Mendes, Force Relaxation Characteristics of Medium Force Orthodontic Latex Elastics: A Pilot Study, ISRN Dentistry 2011, 536089 (2011). DOI: 10.5402/2011/536089

D.J. Fernandes, G.M.A. Fernandes, F. Artese, C.N. Elias e A.M. Mendes, Force extension relaxation of medium force orthodontic latex elastics, Angle Orthod. 81, 812-819 (2011). DOI: 10.2319/120810-709.1

D.J. Fernandes, R.V. Peres, A.M. Mendes e C.N. Elias, Understanding the Shape-Memory Alloys Used in Orthodontics, ISRN Dentistry 2011, 132408 (2011). DOI: 10.5402/2011/132408

G.V.O. Fernandes, G.G. Alves, A.B.R. Linhares, M.H. Prado da Silva e J.M. Granjeiro, Evaluation of Cytocompatibility of Bioglass-Niobium Granules with Human Primary Osteoblasts: A Multiparametric Approach, Key Eng. Mater. 493-494, 37-42 (2011). DOI: 10.4028/www.scientific.net/KEM.493-494.37

T.J. Fernandes, E. Mavropoulos, J.B. Campos, L.A. Gobbo e M.H. Prado da Silva, PVP Addition During Hydroxyapatite Synthesis: Effect on Albumin Adsoprtion, Key Eng. Mater. 493-494, 757-762 (2011). DOI: 10.4028/www.scientific.net/KEM.493-494.757

F.M. Fonseca, M.H. Prado da Silva, L.H.L. Louro e C.R.C. Costa, Fabricação de biocerâmicas porosas de hidroxiapatita por gelcasting, RMCT 28(1), 33-41 (2011).

G.S. Guimarães, L.S. Morais, C.N. Elias, C.A.C. Pérez e A.M. Bolognese, Análise química e morfológica do esmalte dentário humano tratado com laser argônio durante a colagem ortodôntica, Dental Press J. Orthod. 16, 100-107 (2011). DOI: 10.1590/S2176-94512011000200013 

C.J. Lima, I.I. Castro da Silva, L.F. H. Barros, J.M. Granjeiro e M.H. Prado da Silva, Resposta do tecido subcutâneo de camundongos à implantação de um novo biovidro à base de óxido de nióbio, Matéria 16, 574-582 (2011).

H.P. Lopes, W.M.M. Chiesa, N.R. Correia, N.C.S. Navegante, C.N. Elias, E.J.L. Moreira e B.E.C. Chiesa, Influence of curvature location along an artificial canal on cyclic fatigue of a rotary nickel-titanium endodontic instrument, Oral Surg. Oral Med. Oral Pathol. Oral Radiol. Endod. 111, 792-796 (2011). DOI: 10.1016/j.tripleo.2010.12.006. Epub 2011 Mar 27

H.P. Lopes, M.A.S. Neves, C.N. Elias, E.J.L. Moreira e J.F. Siqueira, Comparison of some physical properties of finger spreaders made of stainless steel or nickel-titanium alloys, Clin. Oral Invest. 15, 661-665 (2011). DOI: 10.1007/s00784-010-0438-2

H.P. Lopes, C.N. Elias, G. Amaral, V.T.L. Vieira, E.J.L. Moreira, M. Mangelli e J.F. Siqueira, Torsional properties of pathfinding instruments, Oral Surg. Oral Med. Oral Pathol. Oral Radiol. Endod. 112, 1-4 (2011). DOI: 10.1016/j.tripleo.2011.04.032

E. Mavropoulos, M.L.F.M. Kede, N.C.C. Rocha, A.M. Costa, A. Tosi, M.H. Prado da Silva e A.M. Rossi, BSA Attachment on Apatite Surface Modified with Zn2+ and Sr2+, Bioceram. Dev. Appl. 1, D101115 (2011). DOI: 10.4303/bda/D101115

F.D. Mishima, L.H.L. Louro, F.N. Moura, L.A. Gobbo e M.H. Prado da Silva, Hydroxyapatite Scaffolds Produced by Hydrothermal Deposition of Monetite on Polyurethane Sponge Substrates, Key Eng. Mater. 493-494, 820-825 (2011). DOI: 10.4028/www.scientific.net/KEM.493-494.820

F.N. Moura, L.H.L. Louro, L.A. Gobbo e M.H. Prado da Silva, Parascholzite Coatings on Niobium Substrates, Key Eng. Mater. 493-494, 477-482 (2011). DOI: 10.4028/www.scientific.net/KEM.493-494.477

A.L.N. Oliveira, C.N. Elias e J.H.C. Lima, Previsão da estabilidade primária de implantes osseointegráveis em função da espessura da cortical, Rev. Bras. Implant. 17, 23-26 (2011).

C.M. Poffo, J.C. de Lima, S.M. Souza, D.M. Trichês, T.A. Grandi e R.S. de Biasi, Photoacoustic study of nanocrystalline silicon produced by mechanical grinding, Physica B 406, 1627-1632 (2011). DOI: 10.1016/j.physb.2011.02.012.

M.H. Prado da Silva e R.P. Weber, Compósitos. Biomateriais em Odontologia: princípios, métodos investigativos e aplicações. Rio de Janeiro: VM Cultural Editora, 2011, p. 79-85.

R.C.V. Rodrigues, H.P. Lopes, C.N. Elias, G. Amaral, V.T.L. Vieira e A.S. De Martin, Influence of Different Manufacturing Methods on the Cyclic Fatigue of Rotary Nickel-Titanium Endontic Instruments, J. Endod. 37, 1553-1557 (2011).

M.V. Santos, C.N. Elias e J.H.C. Lima, The Effects of Superficial Roughness and Design on the Primary Stability of Dental Implants, CIDRR 13, 215-223 (2011). DOI: 10.1111/j.1708-8208.2009.00202.x. Epub 2009 Sep 9

C.L.A. Silva, L.E.S.C. Pinto, L.H.L. Louro, E.S. Lima e M.H. Prado da Silva, Caracterização Microestrutural do Compósito Hidroxiapatia Bovina-Biovidro, Rev.Mil.Ci.Tec. 28(1), 8-23 (2011).

S.M. Souza, D.M. Trichês, C.M. Poffo, J.C. de Lima, T.A. Grandi e R.S. de Biasi, Structural, thermal, optical, and photoacoustic study of nanocrystalline Bi2Te3 produced by mechanical alloying, J. Appl. Phys. 109, 013512 (2011). DOI: 10.1063/1.3520658

D.M. Trichês, J.C. de Lima, S.M. Souza, C.M. Poffo, T.A. Grandi e R.S. de Biasi, Mechanical alloying of Co and Sb: Structural, thermal, optical, and photoacoustic studies, J. Appl. Phys. 110, 083528 (2011). DOI: 10.1063/1.3650453

V.T.L. Vieira, C.N. Elias, H.P. Lopes, E.J.L. Moreira e L.C. Souza, A NiTi rotary instrument manufactured by twisting: morphology and mechanical properties, Dental Press Endod. 1, 21-27 (2011).

R.S. de Biasi e M.L.N. Grillo, Electron magnetic resonance investigation of chromium diffusion in yttria powders, Physica B 405, 1267-1268 (2010). DOI: 10.1016/j.physb.2009.11.062

T.P. Busquim, C.N. Elias, J.E. May, S.E. Kuri e P.A.P. Nascente, Titanium Oxide Layer on the Surface of Anodized Dental Implants, em Medical Device Materials V, ASM International, Russell Township, 2010, p. 60-68.

P.S.D. Ducos e C.N. Elias, Simulação do comportamento de mini-implantes para ancoragem ortodôntica, Rev. Bras. Implantodont. 16, 5-7 (2010)

C.N. Elias e L. Meirelles, Improving osseointegration of dental implants, Exp. Rev. Med. Devices 7, 241-256 (2010). DOI: 10.1586/erd.09.74

C.N. Elias e C. Santos, Próteses cerâmicas produzidas por usinagem CAD/CAM, Implant News 7, 183-190 (2010).

G.S. Guimarães, L.S. Morais, C.N. Elias, M.A. Meyers, L.R. Andrade, C.A. Muller e M. Muller, Sequential bone healing of immediately loaded mini-implants: histomorphometric and fluorescence analysis, AJODO 137, 80-90 (2010). DOI: 10.1016/j.ajodo.2007.12.035

R.B. Lehmann e C.N. Elias, Uso de simulação 3D no desenvolvimento de implantes e sistemas protéticos com pilares retos e angulados, Implant News 7, 113-120 (2010).

H.P. Lopes, C.N. Elias e J.F. Siqueira Jr., Instrumentos Endodônticos. ENDODONTIA - Biologia e Técnica. Rio de Janeiro: Editora Guanabara Koogan S.A., 2010, v. 01, p. 305-413.

H.P. Lopes, J.F. Siqueira Jr. e C.N. Elias, Preparo Químico-Mecânico dos Canais Radiculares. ENDODONTIA - Biologia e Técnica. Rio de Janeiro: Editora Guanabara Koogan S.A., 2010, v. 01, p. 415-479.

H.P. Lopes, C.N. Elias, J.F. Siqueira Jr. e M.M.D. Batista, Fratura dos Instrumentos Endodônticos: Fundamentos Teóricos e Práticos. ENDODONTIA - Biologia e Técnica. Rio de Janeiro: Editora Guanabara Koogan S.A., 2010, v. 01, p. 481-505.

H.P. Lopes, J.F. Siqueira Jr., C.N. Elias e M.A.R. Prado, Acidentes e Complicações em Endodontia. ENDODONTIA - Biologia e Técnica. Rio de Janeiro: Editora Guanabara Koogan S.A., 2010, v. 01, p. 507-530.

H.P. Lopes, J.F. Siqueira Jr. e C.N. Elias, Substâncias Químicas Empregadas no Preparo dos Canais Radiculares. ENDODONTIA - Biologia e Técnica. Rio de Janeiro: Editora Guanabara Koogan S.A., 2010, v.01, p. 531-571.

H.P. Lopes, J.F. Siqueira Jr., C.N. Elias e I.N. Rôças, Retratamento Endodôntico. ENDODONTIA - Biologia e Técnica. Rio de Janeiro: Editora Guanabara Koogan S.A., 2010, v. 01, p. 691-737.

H.P. Lopes, C.N. Elias e E.J.L. Moreira, Estudo comparativo da resistência em flexão de instrumentos endodônticos de NiTi mecanizados, Rev. Ondontol. Bras. Cent. 18, 48-50 (2010).

M. Marquezan, T.C.L. Lau, E.F. Sant'Anna, A.C.O. Ruellas e C.N. Elias, Shear bond strengths of orthodontic brackets with a new LED cluster curing light, J. Orthod. 37, 37-42 (2010). DOI: 10.1179/14653121042858

F.A. Rocha e C.N. Elias, Influência da técnica cirúrgica e forma do implante na estabilidade primária, Rev. Ondontol. Bras. Cent. 18, 26-29 (2010).

J.F. Siqueira Jr., H.P. Lopes e C.N. Elias, Obturação dos Canais Radiculares - Princípios e Técnicas de Compactação Lateral. ENDODONTIA - Biologia e Técnica. Rio de Janeiro: Editora Guanabara Koogan S.A., 2010, v. 01, p. 641-670.

S.M. Souza, D.M. Trichês, J.C. de Lima, T.A. Grandi e R.S. de Biasi, Structural, optical and photoacoustic study of Sb2Te3 prepared by mechanical alloying, Physica B 405, 2807-2814 (2010). DOI: 10.1016/j.physb.2010.04.003

D.M. Trichês, S.M. Souza, C.M. Poffo, J.C. de Lima, T.A. Grandi e R.S. de Biasi, Structural instability and photoacoustic study of AlSb prepared by mechanical alloying, J. Alloys Comp. 505, 762-767 (2010). DOI: 10.1016/j.jallcom.2010.06.137

 

- ARTIGOS DE 1972 A 2009 -


Papers 2010-2015

 

J.M. Alves, L.P.M. Brandão and A.S. Paula, The influence of sample preparation on the quantitative analysis of the volume fraction of martensite formed on a 304L trip steel, Mater. Res. 18, 159-163 (2015). DOI: 10.1590/1516-1439.347714

M.A.L. Alves, C.N. Elias, A.N. Machado and T. Wassal, Desadaptação entre implantes e pilares protéticos de zircônia, titânio e Ni-Cr, Implant News 12, 611-617 (2015).

A.R. Araujo, F.M. Margem, S.N. Monteiro, C.M.F. Vieira, B.M. Araujo and E.S. Lima, Ballistic efficiency of an individual epoxy composite reinforced with sisal fibers in multilayered armor, Mater. Res. 18, 55-62 (2015). DOI: 10.1590/1516-1439.346314 

F.S. Assis, F.M. Margem, T.C. Cordeiro, A.B.S. Figueiredo, F.O. Braga and S.N. Monteiro, Photoacoustic thermal characterization of banana fibers, Mater. Res. 18, 240-245 (2015). DOI: 10.1590/1516-1439.368914

N.G. Azeredo, J. Alexandre, A.R.G. Azevedo, G.C. Xavier, V.S. Candido and S.N. Monteiro, Characterization of precursor clay body and Weibull analysis of the compressive strength of structural blocks, Mater. Sci. Forum 820, 436-442 (2015). DOI: 10.4028/www.scientific.net/MSF.820.438

N.G. Azeredo, E.B. Zanelato, J. Alexandre, A.R.G. Azevedo, G.C. Xavier, V.S. Candido and S.N. Monteiro, Performance of precursor materials and fired ceramics for structural blocks, Mater. Sci. Forum 820, 13-17 (2015). DOI: 10.4028/www.scientific.net/MSF.820.13

Azevedo, A.R.G., Alexandre, J., Zanelato, E.B., Oliveira, M.P., Souza, R.C., Xavier, G.C. and Monteiro, S.N., Characterization of a clay body used for red ceramics in São Sebastião district of Campos dos Goitacazes, state of Rio de Janeiro, Brazil, Mater. Sci. Forum 820, 8-12 (2015). DOI: 10.4028/www.scientific.net/MSF.820.8

Azevedo, A.R.G., Jonas, A., Oliveira, M.P., Souza, R.C., Zanelato, E.B. and Monteiro, S.N., Evaluation of the industrial raw material used for ceramic production in São José de Ubá, state of Rio de Janeiro, Brazil, Mater. Sci. Forum 820, 3-7 (2015). DOI: 10.4028/www.scientific.net/MSF.820.3

Botelho, R.A., Diniz, S.B., Cunha, M.A. and Brandão, L.P.M., Properties of NGO 3% silicon steel asymmetrically cold rolled, Mater. Res. 18, 143-147 (2015). DOI: 10.1590/1516-1439.352714

Cerqueira, N.A., Alexndre, J., Azevedo, A.R.G., Xavier, G.C., Candido, V.S., Vieira, C.M.F. and Monteiro, S.N., Study of a typical soil used for concrete bricks in Miracema, state of Rio de Janeiro, Brazil, Mater. Sci. Forum 820, 40-45 (2015). DOI: 10.4028/www.scientific.net/MSF.820.40

Cruz, R.B., Lima Júnior, E.P., Monteiro, S.N. and Louro, L.H.L., Giant bamboo fiber reinforced epoxy composite in multilayered ballistic armor, Mater. Res. 18, 70-75 (2015). DOI: 10.1590/1516-1439.347514 

de Biasi, R.S. and Grillo, M.L.N., Electron magnetic resonance of diluted solid solutions of Gd3+ in BaTiO3, Mater. Res. 18, 288-291 (2015). DOI: 10.1590/1516-1439.298214 

de Biasi, R.S., Lopes, R.D.S., Carvalho, D.G. and Figueiredo, A.B.S., FMR lineshape of cobalt ferrite nanoparticles, Ceram. Int. 41, 865-867 (2015). DOI: 10.1016/j.ceramint.2014.08.129

Elias, C.N., Fernandes, D.J. and Roestel, J., Resistência à compressão e fadiga de implantes dentários de titânio comercialmente puro endurecido, Implant News 12, 17-24 (2015).

Fernandes, D.J., Ruellas, A.C.O. and Elias, C.N., Influence of screw length and bone thickness on the stability of temporary implants, Materials 8, 6558-6569 (2015). DOI: 10.3390/ma8095322

Fernandes, D.J., Elias, C.N., Peres, R.V. and Mendes, A.M., Mechanical performance of nickel-titanium archwires, Mater. Res. 18, 1264-1277 (2015). DOI: 10.1590/1516-1439.003615 

Fernandes, D.J., Elias, C.N. and Valiev, R.Z., Properties and performance of ultrafine grained titanium for biomedical applications, Mater. Res. 18, 1163-1175 (2015). DOI: 10.1590/1516-1439.005615

Glória G.O., Margem F.M., Ribeiro, C.G.D., Moraes, Y.M., Cruz, R.B., Silva, F.A. and Monteiro, S.N., Charpy impact tests of epoxy composites reinforced with giant bamboo fibers, Mater. Res. 18, 178-184 (2015). DOI: 10.1590/1516-1439.360614 

Hissanaga, B.M.M.S. and Brandão, L.P.M., Variáveis do processo termomecânico que influenciam a relação elástica do vergalhão CA-60, RMCT 32, 54-67 (2015).

Licurgo, J.S.C., Vieira, C.M.F., Candido, V.S. and Monteiro, S.N., Improvement of clay ceramic properties by glass polishing sludge incorporation, Mater. Sci. Forum 820, 432-437 (2015). DOI: 10.4028/www.scientific.net/MSF.820.432

Lima, E.S., Itaboray, L.M., Santos, A.P.O., Santos, C. and Cabral, R.F., Mechanical properties evaluation of Al2O3-UAG ceramic composites, Mater. Sci. Forum 820, 239-243 (2015). DOI: 10.4028/www.scientific.net/MSF.820.239

Lopes, H.P., Elias, C.N., Vieira, M.V.B., Batista, M.M.D., Lopes, W.S.P., Vieira, V.T.L. and Cunha, R.S., Evaluation of the mechanical properties of three new root canal instruments, ENDO 9, 137-142 (2015).

Lopes, F.P.D., Lu, C.H., Shiteng, Z., Monteiro, S.N. and Meyers, M.A., Room temperature dynamic strain aging in ultrafine-grained titanium, Metallurgical and Materials Transactions. A 46, 4468-4477 (2015). DOI: 10.1007/s11661-015-3061-7

Lopes, W.S.P., Lopes, H.P., Elias, C.N., Reynier, M.V. and Alves, F.R.F., Flexibility and resistance to cyclic fatigue of instruments manufactured by different methods, Dental Press Endod. 5, 13-18 (2015).

Louzada T.M., Morais, A.S.C., Vieira, C.M.F., Candido, V.S. and Monteiro, S.N., Microstructural analysis of clayey ceramics incorporated with fluorescent lamp glass waste, Mater. Sci. Forum 820, 468-473 (2015). DOI: 10.4028/www.scientific.net/MSF.820.468

Luz, F.S., Lima Jr., E.P., Louro, L.H.L. and Monteiro, S.N., Ballistic test of multilayered armor with intermediate epoxy composite reinforced with jute fabric, Mater. Res. 18, 170-177 (2015). DOI: 10.1590/1516-1439.358914

Manfro, R.C., Bortoluzzi, M.C., Fabris, V., Elias, C.N. and Araujo, V.C., Clinical evaluation of anodized surface implants submitted to a countertorque of 25 Ncm after 60 days of osseointegration: study in humans, JMOSI 14, 1-6 (2015).

Margem, J.G., Gomes, V.A., Margem, F.M., Ribeiro, C.G.D., Braga, F.O. and Monteiro, S.N., Flexural behavior of epoxy matrix composites reinforced with malva fiber, Mater. Res. 18, 114-120 (2015). DOI: 10.1590/1516-1439.359514 

Monteiro, S.N., Louro, L.H.L., Trindade, W., Elias, C.N., Ferreira, C.L., Lima, E.S., Weber, R.P., Suarez, J.C.M., Figueiredo, A.B.S., Pinheiro, W.A., Silva, L.C. and Lima Júnior, E.P., Natural curaua fiber-reinforced composites in multilayered ballistic armor, Metall. Mater. Trans. A 46, 4567-4577 (2015). DOI: 10.1007/s11661-015-3032-z

Monteiro, S.N., Lima Junior, E.P., Louro, L.H.L., Silva, L.C. and Drelich, J.W., Unlocking function of aramid fibers in multilayered ballistic armor, Metall. Mater. Trans. A 46, 37-40 (2015). DOI: 10.1007/s11661-014-2678-2

Morais, A.S.C., Louzada, T.M., Candido, V.S., Monteiro, S.N. and Vieira, C.M.F., Assessment of the technological properties of high temperature fired clayley ceramics incorporated with glass waste, Mater. Sci. Forum 820, 449-454 (2015). DOI: 10.4028/www.scientific.net/MSF.820.449

Paneto, F.J., Pereira, J.L., Lima, J.O., Jesus, E.J., Silva, L.A., Lima, E.S., Cabral, R.F. and Santos, C., Effect of porosity on hardness of Al2O3-Y3Al5O12 ceramic composite, Int. J. Refract. Met. Hard Mater. 48, 365-368 (2015). DOI: 10.1016/j.ijrmhm.2014.09.010

Pedroti L.G., Vieira, C.M.F., Alexandre, J., Xavier, G.C., Candido, V.S. and Monteiro, S.N., Granite waste from diamond wire sawing addition into concrete for civil construction, Mater. Sci. Forum 820, 503-508 (2015). DOI: 10.4028/www.scientific.net/MSF.820.503

Prates, P.B., Maliska, A.M., Ferreira, A.S., Poffo, C.M., Borges, Z.V., Lima, J.C. and de Biasi, R.S., Structural, thermal, and photoacoustic study of nanocrystalline Cr3Ge produced by mechanical alloying, J. Appl. Phys. 118, 154903-1- 154903-9 (2015). DOI: 10.1063/1.4933271

Prado da Silva, M.H., Rocha, D.N., Gobbo, L.A., Azevedo, L.M.S., Louro, L.H.L., Costa, A.M. and Campos, J.B., Synthesis of piezoelectric and bioactive NaNbO3 from metallic niobium and niobium oxide, Journal of Biomedical Materials Research. Part B, Applied Biomaterials. DOI: 10.1002/jbm.b.33453

Sigilião, L.C.F., Marquezan, M., Elias, C.N., Ruellas, A.C.O. and Sant’anna, E.F., Efficiency of different protocols for enamel clean-up after bracket debonding: an in vitro study, DPJO 20, 70-85 (2015). DOI: 10.1590/2177-6709.20.5.078-085.oar

Sousa, T.G., Diniz, S.B., Pinto, A.L. and Brandão, L.P.M., Dislocation density by x-ray diffraction in a brass deformed by rolling and ECAE, Mater. Res. 18, 246-249 (2015). DOI: 10.1590/1516-1439.369214 

Souza, F.D.M, Pedroti, L.D., Vieira, C.M.F., Monteiro, S.N., Xavier, G.C. and Candido, V.S., Pozzolanic activity of wastes from fired clay ceramic industry for incorporation into concrete, Mater. Sci. Forum 820, 515-519 (2015). DOI: 10.4028/www.scientific.net/MSF.820.515

Teles, M.C.A., Glória, G.A., Rodrigues, G.A., Netto, P.A., Margem, F.M., Braga, F.O. and Monteiro, S.N., Evaluation of the diameter influence on the tensile strength of pineapple leaf fibers (PALF) by Weibull method, Mater. Res. 18, 185-192 (2015). DOI: 10.1590/1516-1439.362514 

Valadão, P.M., Silva, F.S.P., Lima, W.B.C. and Elias, C.N., Influência da distribuição dos implantes nas deformações da mandíbula com o carregamento da infraestrutura para prótese total fixa parafusada – estudo in vitro, Implant News 12, 789-794 (2015).

Vieira, C.M.F., Candido, V.S. and Monteiro, S.N., Addition of ornamental stone waste to improve distinct formulations of clayev ceramics, Mater. Sci. Forum 820, 419-424 (2015). DOI: 10.4028/www.scientific.net/MSF.820.419

Vilani, G.N.L., Ruellas, A.C.O., Elias, C.N. and Mattos, C.T., Estabilidade de mini-implantes lisos e porosos: avaliação clínica and biomecânica – estudo in vivo, DPJO 20, 35-42 (2015). DOI: 10.1590/1807-3107BOR-2015.vol29.0023 

Vilani, G.N.L., Ruellas, A.C.O., Mattos, C.T., Fernandes, D.J. and Elias, C.N., Influence of cortical thickness on the stability of mini-implants with microthreads, Braz. oral res. 29, 1-7 (2015). DOI: 10.1590/1807-3107

Vilani, G.N.L., Ruellas, A.C.O., Elias, C.N. and Mattos, C.T., Stability of smooth and rough mini-implants: clinical and biomechanical evaluation – an in vivo study, DPJO 20, 35-42 (2015). DOI: 10.1590/2177-6709.20.5.035-042.oar

A.P. Barbosa, M.P. Oliveira, G.R. Alto, F.M. Margem and S.N. Monteiro, Charpy impact test of epoxy matrix composites reinforced with buriti fibers, Mater. Sci. Forum (online) 775-776, 296-301 (2014). DOI: 10.4028/www.scientific.net/MSF.775-776.296

A.P. Barbosa, M.P. Oliveira, G.R. Alto, F.M. Margem and S.N. Monteiro, Manufacturing of epoxy composites incorporated with buriti fibers and evaluation of thermogravimetric behavior, Mater. Sci. Forum (online) 805, 460-465 (2014). DOI: 10.4028/www.scientific.net/MSF.775-776.296

R.S. de Biasi and D.G. Carvalho, Magnetocrystalline anisotropy of NiZnFe2O4, Ceram. Int. 40, 10099-10102 (2014). DOI: 10.1016/j.ceramint.2014.03.183

R.S. de Biasi and M.L.N. Grillo, Investigation of Mn2+ Diffusion in Lime (CaO) Using Electron Magnetic Resonance, Mater. Res. 17, 434-435 (2014). DOI: 10.1590/S1516-14392014005000004

R.S. de Biasi, R.D.S. Lopes, D.G. Carvalho and A.B.S. Figueiredo, FMR lineshape of cobalt ferrite nanoparticles, Ceram. Int. 41, 865-867 (2014). DOI: 10.1016/j.ceramint.2014.08.129

M.J. Bondioli, C. Santos, K. Strecker, E.S. Lima, M.H. Prado da Silva and R.O. Magnago, Oxidation behavior of LPS-SiC ceramics sintered with AlN/Y2O3 as additive, Int. J. Refract. Met. Hard Mater. 42, 246-254 (2014). DOI: 10.1016/j.ijrmhm.2013.09.013

R.F. Cabral, L.H.L. Louro, J.B. Campos and E.S. Lima, Efeito da adição de Nb2O5 na sinterização de Al2O3-Y2O3, Matéria 19, 125-131 (2014). DOI: 10.1590/s1517-70762014000200007

V.S. Candido, M.P. Oliveira, R.A. Gouveis, A.L.B.S. Martins and S.N. Monteiro, Characterization of tensile strength dependence with diameter of sponge gourd fibers by Weibull statistical analysis, Mater. Sci. Forum (online) 775-776, 86-91 (2014). DOI: 10.4028/www.scientific.net/MSF.775-776.86

V.S. Candido, M.P. Oliveira, R.A. Gouveia, A.L.B.S. Martins and S.N. Monteiro, Weibull analysis to characterize the diameter dependence of tensile strength in sugarcane bagasse fibers, Mater. Sci. Forum (online) 775-776, 80-85 (2014). DOI: 10.4028/www.scientific.net/MSF.775-776.80

R.F.A. Cardoso, L.P.M. Brandao, M.A. Cunha, C.H.P. Paiva, J.R.L. Amaro, L.T. Faria, L.R.O. Rosa, R.P. Garcia Jr., T.A. Saldanha and V.H.G. Bezerra, Evaluation of the Relationship between crytallographic texture and magnetic properties through the magnetocrystalline anisotropy coefficient, Mater. Sci. Forum (online) 775-776, 427-430 (2014). DOI: 10.4028/www.scientific.net/MSF.775-776.427

M.E. R. Coimbra, M.G. Bernardes, C.N. Elias and P.G.G.G. Coelho, In vitro degradation of poly-l-dl-lactic acid (PLDLLA) after two processing methods, IJET 20, 45-64 (2014). DOI: 10.4028/www.scientific.net/JBBBE.20.45

L.R.O. Cruz, J.A.S. Fernandes, C.L. Ferreira and W.A. Pinheiro, Microstructural and optical properties of CSS and CBD-CDS thin films for photovoltaic solar cells, Materia 19, 228-234 (2014). DOI: 10.1590/S1517-70762014000300006 

R.C. Cuozzo, M.H.M.R. Leao, L.A. Gobbo, D.N. Rocha, N.M. E. Ayada, W. Trindade, A. M. Costa and M. H. Prado da Silva, Zinc alginatehydroxyapatite composite microspheres for bone repair, Ceram. Int. 40, 11369-11375 (2014). DOI: 10.1016/j.ceramint.2014.02.107

G. De-Deus, V.T.L. Vieira, E.J.N. Silva, H.P. Lopes, C.N. Elias and E.J.L. Moreira, Bending resistance and dynamic and static cyclic fatigue life of Reciproc and WaveOne Large Instruments, J. Edodon. 40, 575-579 (2014). DOI: 10.1016/j.joen.2013.10.013

C.N. Elias, H.P. Lopes, M.V.B. Vieira, L.C. Souza and V.T. Vieira, Influence of surface morphology on the torsion fracture of NiTi endodontic instruments, J. Mater. Eng. Perform. 26, 1-6 (2014). DOI: 10.1007/s11665-014-1043-3

C.N. Elias, A.M. Melo and H.E.S Santos, Degradation and mechanical properties of zirconia 3-unit fixed dental prostheses machined on a CAD/CAM system, Int. J. Appl. Ceram. Technol., 11, 513/523 (2014). DOI: 10.1111/ijac.12118

C.N. Elias, D.J. Fernandes, C.R.S. Resende and J. Roestel, Mechanical properties, surface morphology and stability of a modified commercially pure high strength titanium alloy for dental implants, Dent. Mater. 31, e1-e13 (2015). DOI: 10.1016/j.dental.2014.10.002

E.S. Lima, A.P.O. Santos, L.M. Itaboray, C. Santos and R.F. Cabral, Development and Characterization of the Al2O3-YAG ceramic composites, Mater. Sci. Forum (online) 798-799, 383-388 (2014). DOI: 10.4028/www.scientific.net/MSF.798-799.383

V.S. Lima and C.N. Elias, Parâmetros físicos e mecânicos que influenciam o aquecimento durante a oesteotomia para implantes dentários, Implant News 11, 161-168 (2014).

H.P. Lopes, M.V.B. Vieira, C.N. Elias, J.F. Siqueira Jr., V.T.L. Vieira, M.M.D. Batista, M.A.S. Neves, E.S. Paiva, C.B. Paula and R.G. Soares, Torsional resistance and toughness of two nickel-titanium instruments: Reciproc versus Waveone, ENDO 8, 1-6 (2014).

W.S.P. Lopes, H.P. Lopes, C.N. Elias, M.V. Reynier, M.M.D. Batista and R.S. Cunha, Resistance to bending and buckling of Waveone and Reciproc instruments, ENDO 8, 153-156 (2014).

A.L.B.S. Martins, R.A. Gouvea, M.P. Oliveira, V.S. Candido and S.N. Monteiro, Characterization of epoxy matrix composites incorporated with sugarcane bagasse fibers, Mater. Sci. Forum (online) 775-776, 319-324. DOI: 10.4028/www.scientific.net/MSF.775-776.102

J.E. May, T.P. Busquim, C.N. Elias, B.J.S. Oliveira, M. Gaboardi and C.R. Ribeiro, Physiological bone loading in the human head and prosthesis size estimation, IJET 14, 130-134 (2014).

D. Mints, C.N. Elias, P. Funkenbusch and L. Meirelles, Integrity of implant surface modifications after insertion, JOMI 29, 97-104 (2014). DOI: 10.11607/jomi.3259

S.N. Monteiro, F.M. Margem, I.L. Silva, A. Bevitori and M.P. Oliveira, Bending mechanical behavior of epoxy matrix reinforced with jute fiber, Mater. Sci. Forum (online) 775-776, 314-318. DOI: 10.4028/www.scientific.net/MSF.775-776.314

S.N. Monteiro, F.M. Margem, R.L. Loiola, F.S. Assis and M.C. Oliveira, Characterization of banana fibers functional groups by infrared spectroscopy, Mater. Sci. Forum (online) 775-776, 250-254 (2014). DOI: 10.4028/www.scientific.net/MSF.775-776.250

S.N. Monteiro, F.M. Margem, T.S. Noan, R.L. Loiola and M.C. Oliveira, Characterization of curaua fibers by infrared spectroscopy, Mater. Sci. Forum (online) 775-776, 325-329 (2014). DOI: 10.4028/www.scientific.net/MSF.775-776.325

S.N. Monteiro, F.M. Margem, A.C. Pereira, N. Simonassi and M.P. Oliveira, Charpy impact tests in epoxy matrix composites reinforced with continuous sisal fiber, Mater. Sci. Forum (online) 775-776, 290-295 (2014). DOI: 10.4028/www.scientific.net/MSF.775-776.290

S.N. Monteiro, F.M. Margem, H.P.G. Santaf Jr., L.B.S. Martins and M.P. Oliveira, Correlation between the diameter and the density of coir fiber using the Weibull statistic methodology, Mater. Sci. Forum (online) 775-776, 266-271 (2014). DOI: 10.4028/www.scientific.net/MSF.775-776.266

S.N. Monteiro, F.M. Margem, L.B.S. Martins, R.L. Loiola and M.C. Oliveira, Dynamic-mechanical analysis of polyester composites reinforced with giant bamboo dencrocalmus giganteus fiber, Mater. Sci. Forum (online) 775-776, 302-307 (2014). DOI: 10.4028/www.scientific.net/MSF.775-776.302

S.N. Monteiro, F.M. Margem, J.I. Margem, L.B.S. Martins, C.G. Oliveira and M.P. Oliveira, Dynamic-mechanical behavior of malva fiber reinforced polyester matrix composites, Mater. Sci. Forum (online) 775-776, 278-283 (2014). DOI: 10.4028/www.scientific.net/MSF.775-776.278

S.N. Monteiro, F.M. Margem, J.I. Margem, L.B.S. Martins, C.G. Oliveira and M.P. Oliveira, Infra-red spectroscopy analysis of malva fibers, Mater. Sci. Forum (online) 775-776, 255-260 (2014). DOI: 10.4028/www.scientific.net/MSF.775-776.255

S.N. Monteiro, F.M. Margem, F.S. Assis, R.L. Loiola and M.P. Oliveira, Izod impact tests in polyester matrix composites reinforced with banana fibers, Mater. Sci. Forum (online) 775-776, 261-265 (2014). DOI: 10.4028/www.scientific.net/MSF.775-776.261

S.N. Monteiro, F.M. Margem, M.P. Oliveira and G.R. Alto, Izod impact tests in polyester matrix composites reinforced with buriti fibers, Mater. Sci. Forum (online) 775-776, 330-335 (2014). DOI: 10.4028/www.scientific.net/MSF.775-776.330

S.N. Monteiro, F.M. Margem, W.P. Inacio, A.C. Pereira and M.P. Oliveira, Tensile properties of epoxy composites reinforced with continuous sisal fibers, Mater. Sci. Forum (online) 775-776, 284-289 (2014). DOI: 10.4028/www.scientific.net/MSF.775-776.284

S.N. Monteiro, F.M. Margem, G.R. Alto, R.L. Loiola and M.P. Oliveira, Tensile strength of polyester composites reinforced with thinner burity fibers, Mater. Sci. Forum (online) 775-776, 183-188 (2014). DOI: 10.4028/www.scientific.net/MSF.775-776.183

S.N. Monteiro, F.M. Margem, L.B.S. Martins, R.L. Loiola and M.P. Oliveira, Tensile strength of polyester matrix composites reinforced with giant bamboo (Dendrocalamus giganteus) fibers, Mater. Sci. Forum (online) 775-776, 308-313. DOI: 10.4028/www.scientific.net/MSF.775-776.308

S.N. Monteiro, F.M. Margem, A.B. Bevitori, I.L.A. Silva and M.P. Oliveira, Thermal characterization of polyester composites reinforced with ramie fibers, Mater. Sci. Forum (online) 308-313, 272-277 (2014). DOI: 10.4028/www.scientific.net/MSF.775-776.272

S.N. Monteiro, E.P.L. Junior, L.H.L. Louro, L.C. Silva and J.W. Drelich, Unlocking function of aramic fibers in mutilayered ballistic armor, Metall. Mater. Trans. A 46, 37-40 (2014).

P.G. Paula, R.J.S. Rodriguez, V.S. Candido and S.N. Monteiro, Formulation and characterization of polypropylene composites alkali treated bagasse fiber, Mater. Sci. Forum (online) 775-776, 642-647 (2014). DOI: 10.4028/www.scientific.net/MSF.775-776.642

E.C. Pereira, L.A. Matlakhova, C.Y. Shingue and S.N. Monteiro, Physical and structural characterization of a monocrystallineCu-13.7Al-4.2Ni alloy subjected to thermal cycling treatments, Metall. Mater. Trans. A 45, 1866-1875 (2014).

M.H. Prado da Silva, F.N. Moura, D.N. Rocha, L.A. Gobbo, A.M. Costa and L.H.L. Louro, Zinc-modified hydroxyapatite coatings obtained from parascholzite alkali conversion, Surf. Coat. Technol. 249, 109-117 (2014). DOI: 10.1016/j.surfcoat.2014.03.052

D.N. Rocha, L.R.O. Cruz, J.L. Prado Neto, N.M.E. Ayad, L.A. Gobbo and M.H. Prado da Silva, Production and Characterization of Hydroxyapatite/Niobo Phosphate Glass Scaffold, Key Eng. Mater. 587, 128-131 (2014).

J.M. Rocha, M.A. Gravina, M.J.S. Campos, C.C.A. Quintao, C.N. Elias and R.W.F. Vitral, Shear bond resistance and enamel surface comparison after the bomding and debonding o ceramic and metallic brackets, Dental Press J. Orthod.19, 77-85 (2014). DOI: 10.1590/2176-9451.19.1.077-085.oar 

H.E.S. Santos, C.N. Elias, C. Santos and C.R.S. Resende, Caracterizacao da Zircônia Policristalina Estabilizada por Ítria por Difração de Raios X, RMCT 31(1), 41-57 (2014).

R.F. Santos, A.C.O. Ruellas, D.J. Fernandes and C.N. Elias, Torques de inserção versus resistência mecânica de mini-implantes inseridos em corticais de diferentes espessuras, Dental Press J. Orthod 19, 90-94 (2014). DOI: 10.1590/2176-9451.19.3.090-094.oar

N.A. Sardinha and L.P.M. Brandao, Comparação da textura cristalográfica de um aco IF após laminação convencional e assimétrica, RMCT 31(1), 30-40 (2014).

T.B. Skaf, L.H.L. Louro, A.L.V. Cardoso, A.V. Gomes and M.H. Prado da Silva, Effect of LiF and CaO additions on MgAl2O4 Dynamic Behavior, Mater. Sci. Forum (online) 798-799, 195-198 (2014). DOI: 10.4028/www.scientific.net/MSF.798-799.195

W. Trindade, M.H. Prado da Silva, A.V. Gomes, C.F.M. Chagas, L.H.L. Louro and J.B. Campos, Comparative study of solid-phase and liquid-phase assisted sintering of Nb2O5-doped alumina, Mater. Sci. Forum (online) 798-799, 691-695 (2014). DOI: 10.4028/www.scientific.net/MSF.798-799.691

W. Trindade, M.H. Prado da Silva, A.V. Gomes, C.F.M. Chagas and L.H.L. Louro, Effect of milling medium on alumina additivated with niobia, Mater. Sci. Forum (online) 798-799, 677-681 (2014). DOI: 10.4028/www.scientific.net/MSF.798-799.677

W. Trindade, M.H. Prado da Silva, A.V. Gomes, J.B. Campos and L.H.L. Louro, Processing and properties of niobia-doped alumina sintered at 1400 oC, Mater. Sci. Forum (online) 798-799, 665-670 (2014). DOI: 10.4028/www.scientific.net/MSF.798-799.665

G.D.C. Antolina, L.R. Cruz and R.R. Avillez, Formação da Liga CdSxTe1-x em Células Solares de CdS/CdTe Submetidas a Tratamento Térmico com CdCl2, RMCT 30(2), 20-31 (2013).

R.S. de Biasi and M.L.N. Grillo, Measurement of small concentrations of manganese in cadmium oxide (CdO) using electron magnetic resonance, Ceram. Int. 39, 2171-2173 (2013). DOI: 10.1016/j.ceramint.2012.07.102

L.R. Cruz, W.A. Pinheiro, R.A. Medeiro, C.L. Ferreira, R.G. Dhere and J.N. Duenow, Influence of heat treatment and back contact processing on the performance of CdS/CdTe thin film solar cells produced in a CSS in-line system, Vacuum 87, 45-49 (2013). DOI: 10.1016/j.vacuum.2012.06.014

E.S. Lima, L.H.L. Louro, R.F. Cabral, J.B. Campos, R.R. Avillez and C.A. Costa, Processing and characterization of Al2O3-yttriun aluminum garnet powders, J. Mater. Res. Technol. 2(1), 18-23 (2013). DOI: 10.1016/j.jmrt.2013.03.004

J.C. de Lima, C.M. Poffo, S.M. Souza, K.D. Machado, D.M. Trichês, T.A. Grandi and R.S. de Biasi, Modeling the amorphous structure of mechanically alloyed Ti50Ni25Cu25 using anomalous wide-angle x-ray scattering and reverse Monte Carlo Simulation, Physica B 424, 60-68 (2013). DOI: 10.1016/j.physb.2013.05.001

R. Martinez, J.C. Escobedo, D.A. Cortés, G.G. Alves, A.B.R. Linhares, J.M. Granjeiro, M.H. Prado da Silva, J.C. Ortiz, J.M. Almanza and E.M. Múzquiz-Ramos, In vitro bioactivity and biocompatibility of a Co-Cr-Mo alloy after heat treatment in contact with different bioactive systems, Ceram. Int. 39, 2003-2011 (2013). DOI: 10.1016/j.ceramint.2012.08.052

D.A.O. Miranda, T.C. Mendes, R.B. Consolaro, C.E. Francischone and C.N. Elias, Forma dos Implantes, in Reabilitação Oral com Implantes Osseointegrados, Editora Napoleão, São Paulo, 2013, p. 26-51.

S.N. Monteiro, F.P.D. Lopes, D.C.O. Nascimento, A.S. Ferreira and K.G. Satyanarayana, Processing and properties of continuous and aligned curaua fibers incorporated polyester composites, J. Mater. Res. Technol. 2(1), 2-9 (2013). DOI: 10.1016/j.jmrt.2013.03.005

S.N. Monteiro, A.L.D. Skury, M.G. Azevedo and G.S. Bobravnitchii, Cubic boron nitride competing with diamond as a superhard engineering material - an overview, J. Mater. Res. Technol. 2(1), 68-74 (2013). DOI: 10.1016/j.jmrt.2013.03.012

C.M. Poffo, J.C. de Lima, S.M. Souza, D.M. Trichês, T.A. Grandi and R.S. de Biasi, Structural, thermal, optical and photoacoustic study of nanostructured FeSb2 prepared by mechanical alloying, Physica B 413, 47-54 (2013). DOI: 10.1016/j.physb.2012.12.037

D.N. Rocha, L.A. Gobbo and M.H. Prado da Silva, Production and characterization of niobate apatite, J. Mater. Res. Technol. 2(1), 24-29 (2013). DOI: 10.1016/j.jmrt.2013.03.006

A.C.O. Ruellas and C.N. Elias, Princípios básicos de biomecânica aplicada na ortodontia, in Biomecânica Aplicada à Clínica, Editora Dental Press, Maringá, 2013, p. 21-33.

C.M.F. Vieira, R. Sanchez, S.N. Monteiro, N. Lalla and N. Quaranta, Recycling of electric arc furnace dust into red ceramic, J. Mater. Res. Technol. 2(2), 88-92 (2013). DOI: 10.1016/j.jmrt.2012.09.001

C.M.F. Vieira, S. Paciornik and S.N. Monteiro, Computer controlled digital microscopy - Wide area characterization of waste incorporated clay ceramics, J. Mater. Res. Technol. 2(2), 202-204 (2013). DOI: 10.1016/j.jmrt.2013.02.007

R.P. Weber, K.K. Chawla and J.C. Miguez Suarez, Influence of notch orientation and temperature on the impact behavior of a dual hardness steel composite, Mater. Sci. Eng. A 580, 279-287 (2013). DOI: 10.1016/j.msea.2013.05.026

E.C. Amaral, L.P.M. Brandão and C.R. Maria, Influência dos parâmetros de pulso na soldagem de ligas de alumínio, Anais do 20o CBECIMAT, Joinville, 2012, p. 7882.

N.M.E. Ayad, A.C.M. Cardoso, P.L.B. dos Santos, M.L. Assunção, L.L. da Rocha, V.G. Pereira, R.P. Weber and J.C.M. Suarez, Influência da degradação ambiental no desempenho de biomateriais poliméricos, Anais do 20o CBECIMAT, Joinville, 2012, p. 9744-9751 (2012).

R.S. de Biasi and M.L.N. Grillo, Electron magnetic resonance of gadolinium-doped calcium fluoride, Physica B 407, 2164-2168 (2012). DOI: 10.1016/j.physb.2012.02.032

R.S. de Biasi and M.L.N. Grillo, Influence of Chromium Concentration on the Electron Magnetic Resonance Linewidth of Cr3+ in SrTiO3, Mater. Res. 15, 473-476 (2012). DOI: 10.1590/S1516-14392012005000053

R.S. de Biasi and L.H.G. Cardoso, A simple model for the magnetocrystalline anisotropy in mixed ferrite nanoparticles, Physica B 407, 3893-3896 (2012). DOI: 10.1016/j.physb.2012.06.017

R.A. Botelho, L.P.M. Brandão, M.A. Cunha and S.C. Paolinelli, Efeito de laminações assimétricas e convencionais com recozimento intermediário na textura cristalográfica de aço silício gno com 3% Si, Anais do 20o CBECIMAT, Joinville, 2012, p. 8850.

T.P. Busquim, S.E. Kuri, C.N. Elias, J.H.C. Lima and C.A. Muller, Caracterização dos óxidos de Ti das superfícies de implantes dentários com diferentes tratamentos, Implant News 9, 207-214 (2012).

R. Buzzoni, C.N. Elias, D.J. Fernandes and J.A.M. Miguel, Avaiação da fricção superficial apresentada por braquetes autoligáveis em condições de tracionamento sob angulação, Dental Press J. Orthod. 17, 51-56 (2012). DOI: 10.1590/S2176-94512012000400013

R.F. Cabral, L.H.L. Louro, M.H. Prado da Silva, J.B. Campos and E.S. Lima, Síntese e caracterização do compósito Al2O3-YAG sem aditivação e Al2O3-YAG e Al2O3 aditivados com Nb2O5, Cerâmica 58, 14-19 (2012). DOI: 10.1590/S0366-69132012000100004

R.F. Cabral, M.H. Prado da Silva, J.B. Campos and E.S. Lima, Study of the Sintering of Mixtures Al2O3-Nb2O5 and Y2O3-Nb2O5, Mater. Sci. Forum 727-728, 799-803 (2012). DOI: 10.4028/www.scientific.net/MSF.727-728.799

R.F. Cabral. M.H. Prado da Silva and E.S. Lima, Sinterização do Compósito Al2O3-YAG com Aditivação do Nb2O5, RMCT 29(1), 3-9 (2012).

R.F.A. Cardoso, C.H.P. Paiva, J.R.L. Amaro, L.S. Teles, R.L.O. Rosa, R.P. Garcia Jr., T.A. Saldanha, V.H.G. Bezerra and L.P.M. Brandão, Avaliação da relação entre textura e propriedades magnéticas através do coeficiente de anisotropia magnetocristalina, Anais do 20o CBECIMAT, Joinville, 2012, p. 8082-8089.

M.V.P. Companhoni, J.R.G. Matheus, T.L. Marcondes and A.L. Pinto, Analysis of microstructure and microhardness of Zr-2.5Nb processed by High-Pressure Torsion (HPT), J. Mater. Sci. 47, 7835-7840 (2012). DOI: 10.1007/s10853-012-6454-7

L.R. Cruz and Q.G.S. San Miguel, Propriedades óticas e microestruturais de filmes finos eletrodepositados de CdTe, Matéria 17, 961-972 (2012). DOI: 10.1590/S1517-70762012000200003 

C.N. Elias, Requisitos gerais para implantes odontológicos osseointegráveis, Implant News 9, 79-86 (2012).

C.N. Elias, A.M. Melo and C. Santos, Influence of CAD/CAM Grinding in the Performance of Sintered Dental Zirconia, Mater. Sci. Forum 727-728, 1081-1083 (2012). DOI: 10.4028/www.scientific.net/MSF.727-728.1081

C.N. Elias, P.A. Gravina, F. Costa e Silva Filho and P.A.P. Nascente, Preparation of Bioactive Titanium Surfaces via Fluoride and Fibronectin Retention, Int. J. Biomater. 2012, PMC3503304 (2012). DOI: 10.1155/2012/290179

C.N. Elias, F.A. Rocha and A.L. Nascimento, Influence of implant shape, surface morphology, surgical technique and bone quality on the primary stability of dental implants, J. Mech. Behav. Biomed. Mater. 16, 169-180 (2012). DOI: 10.1016/j.jmbbm.2012.10.010

C.N. Elias, A.C.O. Ruellas and D.J. Fernandes, Orthodontic Implants: Concepts for the Orthodontic Practitioner, Int. J. Dent. 2012, 549761 (2012). DOI: 10.1155/2012/549761

A. Elzubair and J.C.M. Suarez, Mechanical behavior of recycled polyethylene/piassava fiber composites, Mater. Sci. Eng., A 557, 29-35 (2012). DOI: 10.1016/j.msea.2012.06.051

T.J. Fernandes, F.M. Oliveira, E.V.O. Tude and M.H. Prado da Silva, Caracterização físico-qímica da associação da hidroxiapatita nanométrica à albumina bovina (BSA), RMCT 29(1), 20-30 (2012).

B.C.F. Guedes, L.H. Almeida, D.S. Santos and L.P.M. Brandão, Processamento termomecânico e textura cristalográfica de uma liga Zr-Nb, Anais do 20o CBECIMAT, Joinville, 2012, p. 8569-8577.

A. Hannickel, M.H. Prado da Silva, H.L. Barros and M.P. Albuquerque, Image J como ferramenta para medida da área de partículas de magnetita em três escalas nanométricas, RMCT 29(4), 16-26 (2012).

M. Hiroce, D.J. Fernandes, C.N. Elias and J.A.M. Miguel, Sliding resistance of polycarbonate self-ligating brackets and stainless steel esthetic archwires, Prog. Orthod. 13, 148-153 (2012). DOI: 10.1016/j.pio.2011.10.004

M.L.F.M. Kede, E. Mavropoulos, N.C.C. Rocha, A.M. Costa, M.H. Prado da Silca, J.C. Moreira and A.M. Rossi, Polymeric sponges coated with hydroxyapatite for metal immobilization, Surf. Coat. Technol. 206, 2810-2816 (2012). DOI: 10.1016/j.surfcoat.2011.11.044

V.L.C. Lapa, L.L.Y. Visconte, J.C.M. Suarez, M.P.O. Sena and R.C.R. Nunes, Caracterização dinâmico-mecânica e óptica de composições de borracha nitrílica contendo nitrocelulose, Anais do 7o Encontro Técnico de Materiais e Química, Rio de Janeiro, 2012, ETQM 150713 (CD-ROM). (4 páginas).

R.B. Lehmann, C.N. Elias and M.A. Zucareli, Influência de conexão interna, plataforma e direção de carregamento nas tensões em implantes tipo morse, Implant News 9, 241-246, 2012.

R. B. Lehmann, C.N. Elias and M.A. Zucareli, Influência da geometria externa do implante dentário tipo Morse na distribuição de tensão, Dental Press Implant. 6, 35-43 (2012).

A.C. Lima, S.N. Monteiro and K.G. Satyanarayana, Recycled Polyethylene Composites Reinforced with Jute Fabric from Sackcloth: Part I-Preparation and Preliminary Assessment, J. Polym. Environ. 20, 245-253 (2012). DOI: 10.1007/s10924-011-0373-6

E.S. Lima, L.H.L. Louro, J.B. Campos. R.R. Avillez, S.N. Monteiro and C.A. Costa, Processing and Characterization of Al2O3-YAG Composite, Mater. Sci. Forum 1334-1339 (2012). DOI: 10.1016/j.jmrt.2013.03.005

E.S. Lima, R.F. Cabral, L.H.L. Louro, M.H. Prado da Silva and J.B. Campos, Formação do compósito bifásico Al2O3-YAG aditivado com Nb2O5, RMCT 29(2), 3-9 (2012).

H.P. Lopes, C.N. Elias, M. Mangelli, W.S. Lopes, G. Amaral, L.C. Souza and J. F. Siqueira Jr., Buckling resistance of pathfinding endodontic instruments, J. Endod. 38, 402-404 (2012). DOI: 10.1016/j.joen.2011.10.029

H.P. Lopes, C.N. Elias, J.F. Siqueira Jr., R.G. Soares, L.C. Souza, J.C.M. Oliveira, W.S.P. Lopes and M. Mangelli, Mechanical Behavior of Pathfinding Endodontic Instruments, J. Endod. 38, 1417-1421 (2012). DOI: 10.1016/j.joen.2012.05.005. Epub 2012 Jun 29

H.P. Lopes, C.N. Elias, F.R. Alves and M.N. Maia, Thermal behavior of conventional and thermoplastic gutta-percha cones, Endodontology 24, 5-9 (2012).

L.G.A. Melo and C. Thaumaturgo, Filito: um material estratégico para fabricação de novos cimentos, RMCT 29(2), 10-24 (2012).

R.L.S.B. Marçal, M.H. Prado da Silva, E.S. Lima and L.H.L. Louro, Production of Borosilicate Glasses from Residues of Ornamental Rocks, Mater. Sci. Forum 727-728, 629-633 (2012). DOI: 10.4028/www.scientific.net/MSF.727-728.629

M.M. Martins, M.A.O. Almeida, C.N. Elias and A.M. Mendes, Bleaching effects on shear bond strengths of orthodontic brackets, Prog. Orthod. 13, 23-29 (2012). DOI: 10.1016/j.pio.2011.05.001

C.Q. Miguez, R.P. Weber, A. Rodolfo Jr. and J.C.M. Suarez, Influência do intemperismo no desempenho mecânico de um composto de PVC, Anais do 20o CBECIMAT, Joinville, 2012, p. 10547-10554.

C.Q. Miguez, R.P. Weber and J.C.M. Suarez, Aplicação do poli(cloreto de vinila) (PVC) na construção civil: pisos em unidades hospitalares, Anais do 4o Congresso Anual da ABDEH, São Paulo, 2012 (6 páginas).

A.C. Miranda, S.N. Monteiro and K.G. Satyanarayana, Recycled Poliethylene Composites Reinforced with Jute Fabric from Sackcloth: Part I - Preparation and Preliminary Assessment, J. Polym. Environ. 20, 245-253 (2012). DOI: 10.1007/s10924-011-0373-6

P.S. Miranda, L.P.M. Brandão and M.A. Cunha, O efeito de envelhecimento entre passes sobre a evolução microestrutural do aço silício HGO 3% Si no recozimento da descarbonetação, Anais do 20o CBECIMAT, Joinville, 2012, p. 6334.

S.N. Monteiro, F.P.D. Lopes, E.A. Carvalho and C.N. Elias, Anomalous Strain Rate Effect in Ultrafine Grained Titanium, J. Mater. Res. Technol. 1, 200-202 (2012). DOI: 10.1016/S2238-7854(12)70033-9

S.N. Monteiro, V. Calado, F.M. Margem and R.J.S. Rodriguez, Thermogravimetric Stability of Less Common Lignocellulosic Fibers - A Review, J. Mater. Res. Technol. 1, 189-199 (2012). DOI: 10.1016/S2238-7854(12)70032-7

S.N. Monteiro, V. Calado, R.J.S. Rodriguez and F.M. Margem, Thermogravimetric Stability of Polymer Composites Reinforced with Less Common Lignocellulosic Fibers - an Overview, J. Mater. Res. Technol. 1, 117-126 (2012). DOI: 10.1016/S2238-7854(12)70021-2

S.N. Monteiro, V. Calado, R.J.S. Rodriguez and F.M. Margem, Thermogravimetric behavior of natural fibers reinforced polymer composites - An overview, Mater. Sci. Eng., A 557, 17-28 (2012). DOI: 10.1016/j.msea.2012.05.109

D.C.O. Nascimento, A.S. Ferreira, S.N. Monteiro, R.C.M.P. Aquino and K.G. Satyanarayana, Studies on the characterization of piassava fibers and their epoxy composites, Composites Part A 43, 353-362 (2012). DOI: 10.1016/j.compositesa.2011.12.004

A.L.N. Oliveira, C.N. Elias and J.H.C. Lima, Variação da estabilidade primária de implantes osseointegráveis em função da estabilidade da cortical, RMCT 29(1), 48-56 (2012).

V.L.F.P. Oliveira, M.H. Prado da Silva, E.S. Lima, C. Santos and L.H.L. Louro, Effect of Glassy Phase Additions to Zirconia on its Sintering Behavior and Microstructure, Mater. Sci. Forum 727-728, 935-939 (2012). DOI: 10.4028/www.scientific.net/MSF.727-728.935

V.L.F.P. Oliveira, M.H. Prado da Silva, E.S. Lima, C. Santos and L.H.L. Louro, Effect of Glassy Phase Additions to Zirconia on its Mechanical Properties, Mater. Sci. Forum 727-728, 940-944 (2012). DOI: 10.4028/www.scientific.net/MSF.727-728.940

L.E.S.C. Pinto and M.H. Prado da Silva, Caracterização microestrutural da hidroxiapatita bovina sinterizada com biovidro niobo-fosfato, RMCT 29(3), 18-27 (2012).

J.F. Pires, B.F.C. Patricio, M.S. Albernaz, G.D. Mendonça, B.F. Coelho, G. Weissmuller, C.N. Elias and R. Santos-Oliveira, Preparation of Biodegradable Poly(L-Lactide) (PLA) Nanoparticles Containing DMSA (Dimercaptosuccinic Acid) as Novel Radiopharmaceutical, Adv. Sci. Lett. 10, 143-145 (2012).

A.A. Ribeiro, C.T. Mattos, A.C. Ruellas, M.T. Araujo and C.N. Elias, In vivo comparison of the friction forces in new and used brackets, Orthodontics 13, e44-e50 (2012).

D.N. Rocha, M.H. Prado da Silva and L.A. Gobbo, Produção de hidroxiapatita parcialmente substituída com nióbio, RMCT 29(3), 11-17 (2012).

A.C.O. Ruellas, C.T. Mattos and C.N. Elias, Avaliação dos torques de inserção e remoção e da resistência mecânica de novos mini-implantes ortodônticos, Ortho Sci., Orthod. Sci. Pract. 5, 23-27 (2012).

A.C.O. Ruellas, C.T. Mattos and C.N. Elias, Controle mecânico durante retração de dentes anteriores usando mini-implantes ortodônticos como ancoragem, Ortho Sci., Orthod. Sci. Pract. 5, 301-309 (2012).

A.I.L. Santana, G.A.C. Branco, C.M.B. Bacaltchuk, D.S. Santos and L.P.M. Brandão, Textura cristalográfica de um tubo de liga de zircônio produzido por laminação a frio, Anais do 20o CBECIMAT, Joinville, 2012, p. 6627-6634.

C. Santos, C.N. Elias, A.M. Melo and S.N. Monteiro, Zirconia Blocks Properties Used for CAD/CAM Dentistry Restorations, Mater. Sci. Forum (online) 727-728, 804-808 (2012). DOI: 10.4028/www.scientific.net/MSF.727-728.804

S.A.S. Santos, E.S. Lima, L.H.L. Louro and C.A.C. Neto, Synthesis of Powders Nanometer Al2O3 by Sol-Gel, Mater. Sci. Forum (online) 727-728, 9-13 (2012). DOI: 10.4028/www.scientific.net/MSF.727-728.9

S.A.S. Santos, E.S. Lima, L.H.L. Louro, C.A.C. Neto and R.R. Avillez, Al2O3-YAG production by sol-gel-method, Anais do 20o CBECIMAT, Joinville, 2012, p. 269-275.

V. Scarpini, R.M. Pinheiro, S.N. Monteiro and C.M.F. Vieira, Effect of the Dry Bulk Density on the Fired Properties of Clayey Ceramics, Mater. Sci. Forum 727-728, 988-992 (2012). DOI: 10.4028/www.scientific.net/MSF.727-728.988

J.D.C.B.K.F. Silva, F.S. Oliveira, I.C. Abud and C.N. Elias, Estudo das propriedades mecânicas de implantes mamários de silicone, Anais do 20o CBECIMAT, Joinville, 2012, p. 11682-11689.

S.M.L. Silva and C.L. Ferreira, Filme fino de Fe-Cr-Al: análise experimental de interações com microondas, morfologia e microestrutura, RMCT 29(4), 27-37 (2012).

J.F. Siqueira Jr., C.N. Elias, I.N. Rôças, F.R.F. Alves, J.C.M. Oliveira, L. Armada and J.C. Provenzano, Princípios biológicos do tratamento endodôntico de dentes com polpa necrosada e tensão perirradicular, Rev. Bras. Odont. 69, 8-14 (2012). DOI: 10.18363/rbo.v69n1.p.08

T.B. Skaf, L.H.L. Louro, M.H. Prado da Silva and A.L.V. Cardoso, Effect of LiF and CaO additions to MgAl2O4 on densification under hot pressing, Anais do 20o CBECIMAT, Joinville, 2012, p. 2123-2130.

C.F.P.P. Vivacqua, Propriedades mecânicas em flexão do osso cortical bovino, RMCT 29(2), 23-30 (2012).

R.P. Weber and J.C.M. Suarez, Avaliação do desempenho de um compósito epóxi/fibra de vidro: efeito da energia de impacto balístico, Anais do 20o CBECIMAT, Joinville, 2012, p. 2469-2475.

A.M.B. Bandeira, M.P.A. Santos, G. Pulitini, C.N. Elias and M.F. Costa, Influence of thermal degradation on the frictional force of an experimental coated NiTi wire, Angle Orthod. 81, 484-489 (2011). DOI: 10.2319/042810-232.1. Epub 2011 Feb 7

R.S. de Biasi and M.L.N. Grillo, Electron magnetic resonance of diluted solid solutions of Gd3+ in SrTiO3, Mater. Chem. Phys, 130, 409-412 (2011). DOI: 10.1016/j.matchemphys.2011.07.002

R.S. de Biasi and M.L.N. Grillo, Electron magnetic resonance investigation of gadolinium diffusion in zircon powders, J. Phys. Chem. Solids 72, 1390-1391 (2011). DOI: 10.1016/j.jpcs.2011.08.014

A.M. Costa, E. Mavropoulos, A. Mello, E.A. dos Santos, R.R. de Oliveira, M.H. Prado da Silva and A.M. Rossi, Spectroscopic Studies of Adsorbed Myoglobin on Hydroxyapatite Surface, Key Eng. Mater. 493-494, 504-507 (2011). DOI: 10.4028/www.scientific.net/KEM.493-494.504

C.N. Elias, F.A. Rocha and M.V. Santos, Influência do tratamento de superfície na estabilidade primária, molhabilidade e integração de implantes, Implant News 8, 14-21 (2011).

C.N. Elias, P.A. Gravina, T.P. Busquim, S.E. Kuri and F.C.S. Filho, Biomimetização da superfície de implantes dentários, Implant News 8, 47-55 (2011).

C.N. Elias, A.C.O. Ruellas and E.C. Marins, Resistência mecânica e aplicações clínicas de mini-implantes ortodônticos, Rev. Bras. Odont. 68, 95-100 (2011). DOI: 10.18363/rbo.v68n1.p.95

R.S. Faeda, R. Spin-Netto, R. Sartori, M.R. Costa, R.J.B. Netto, E. Marcantonio, C.N. Elias and E. Marcantonio Jr., Osseointegração de implantes tratados com ácidos e anodizados: estudo biomecânico em coelhos, Implant News 8, 109-114 (2011).

D.J. Fernandes, G.M. Abrahão, C.N. Elias and A.M. Mendes, Force Relaxation Characteristics of Medium Force Orthodontic Latex Elastics: A Pilot Study, ISRN Dentistry 2011, 536089 (2011). DOI: 10.5402/2011/536089

D.J. Fernandes, G.M.A. Fernandes, F. Artese, C.N. Elias and A.M. Mendes, Force extension relaxation of medium force orthodontic latex elastics, Angle Orthod. 81, 812-819 (2011). DOI: 10.2319/120810-709.1

D.J. Fernandes, R.V. Peres, A.M. Mendes and C.N. Elias, Understanding the Shape-Memory Alloys Used in Orthodontics, ISRN Dentistry 2011, 132408 (2011). DOI: 10.5402/2011/132408

G.V.O. Fernandes, G.G. Alves, A.B.R. Linhares, M.H. Prado da Silva and J.M. Granjeiro, Evaluation of Cytocompatibility of Bioglass-Niobium Granules with Human Primary Osteoblasts: A Multiparametric Approach, Key Eng. Mater. 493-494, 37-42 (2011). DOI: 10.4028/www.scientific.net/KEM.493-494.37

T.J. Fernandes, E. Mavropoulos, J.B. Campos, L.A. Gobbo and M.H. Prado da Silva, PVP Addition During Hydroxyapatite Synthesis: Effect on Albumin Adsoprtion, Key Eng. Mater. 493-494, 757-762 (2011). DOI: 10.4028/www.scientific.net/KEM.493-494.757

F.M. Fonseca, M.H. Prado da Silva, L.H.L. Louro and C.R.C. Costa, Fabricação de biocerâmicas porosas de hidroxiapatita por gelcasting, RMCT 28(1), 33-41 (2011).

G.S. Guimarães, L.S. Morais, C.N. Elias, C.A.C. Pérez and A.M. Bolognese, Análise química e morfológica do esmalte dentário humano tratado com laser argônio durante a colagem ortodôntica, Dental Press J. Orthod. 16, 100-107 (2011). DOI: 10.1590/S2176-94512011000200013 

C.J. Lima, I.I. Castro da Silva, L.F. H. Barros, J.M. Granjeiro and M.H. Prado da Silva, Resposta do tecido subcutâneo de camundongos à implantação de um novo biovidro à base de óxido de nióbio, Matéria 16, 574-582 (2011).

H.P. Lopes, W.M.M. Chiesa, N.R. Correia, N.C.S. Navegante, C.N. Elias, E.J.L. Moreira and B.E.C. Chiesa, Influence of curvature location along an artificial canal on cyclic fatigue of a rotary nickel-titanium endodontic instrument, Oral Surg. Oral Med. Oral Pathol. Oral Radiol. Endod. 111, 792-796 (2011). DOI: 10.1016/j.tripleo.2010.12.006. Epub 2011 Mar 27

H.P. Lopes, M.A.S. Neves, C.N. Elias, E.J.L. Moreira and J.F. Siqueira, Comparison of some physical properties of finger spreaders made of stainless steel or nickel-titanium alloys, Clin. Oral Invest. 15, 661-665 (2011). DOI: 10.1007/s00784-010-0438-2

H.P. Lopes, C.N. Elias, G. Amaral, V.T.L. Vieira, E.J.L. Moreira, M. Mangelli and J.F. Siqueira, Torsional properties of pathfinding instruments, Oral Surg. Oral Med. Oral Pathol. Oral Radiol. Endod. 112, 1-4 (2011). DOI: 10.1016/j.tripleo.2011.04.032

E. Mavropoulos, M.L.F.M. Kede, N.C.C. Rocha, A.M. Costa, A. Tosi, M.H. Prado da Silva and A.M. Rossi, BSA Attachment on Apatite Surface Modified with Zn2+ and Sr2+, Bioceram. Dev. Appl. 1, D101115 (2011). DOI: 10.4303/bda/D101115

F.D. Mishima, L.H.L. Louro, F.N. Moura, L.A. Gobbo and M.H. Prado da Silva, Hydroxyapatite Scaffolds Produced by Hydrothermal Deposition of Monetite on Polyurethane Sponge Substrates, Key Eng. Mater. 493-494, 820-825 (2011). DOI: 10.4028/www.scientific.net/KEM.493-494.820

F.N. Moura, L.H.L. Louro, L.A. Gobbo and M.H. Prado da Silva, Parascholzite Coatings on Niobium Substrates, Key Eng. Mater. 493-494, 477-482 (2011). DOI: 10.4028/www.scientific.net/KEM.493-494.477

A.L.N. Oliveira, C.N. Elias and J.H.C. Lima, Previsão da estabilidade primária de implantes osseointegráveis em função da espessura da cortical, Rev. Bras. Implant. 17, 23-26 (2011).

C.M. Poffo, J.C. de Lima, S.M. Souza, D.M. Trichês, T.A. Grandi and R.S. de Biasi, Photoacoustic study of nanocrystalline silicon produced by mechanical grinding, Physica B 406, 1627-1632 (2011). DOI: 10.1016/j.physb.2011.02.012.

M.H. Prado da Silva and R.P. Weber, Compósitos. Biomateriais em Odontologia: princípios, métodos investigativos e aplicações. Rio de Janeiro: VM Cultural Editora, 2011, p. 79-85.

R.C.V. Rodrigues, H.P. Lopes, C.N. Elias, G. Amaral, V.T.L. Vieira and A.S. De Martin, Influence of Different Manufacturing Methods on the Cyclic Fatigue of Rotary Nickel-Titanium Endontic Instruments, J. Endod. 37, 1553-1557 (2011).

M.V. Santos, C.N. Elias and J.H.C. Lima, The Effects of Superficial Roughness and Design on the Primary Stability of Dental Implants, CIDRR 13, 215-223 (2011). DOI: 10.1111/j.1708-8208.2009.00202.x. Epub 2009 Sep 9

C.L.A. Silva, L.E.S.C. Pinto, L.H.L. Louro, E.S. Lima and M.H. Prado da Silva, Caracterização Microestrutural do Compósito Hidroxiapatia Bovina-Biovidro, Rev.Mil.Ci.Tec. 28(1), 8-23 (2011).

S.M. Souza, D.M. Trichês, C.M. Poffo, J.C. de Lima, T.A. Grandi and R.S. de Biasi, Structural, thermal, optical, and photoacoustic study of nanocrystalline Bi2Te3 produced by mechanical alloying, J. Appl. Phys. 109, 013512 (2011). DOI: 10.1063/1.3520658

D.M. Trichês, J.C. de Lima, S.M. Souza, C.M. Poffo, T.A. Grandi and R.S. de Biasi, Mechanical alloying of Co and Sb: Structural, thermal, optical, and photoacoustic studies, J. Appl. Phys. 110, 083528 (2011). DOI: 10.1063/1.3650453

V.T.L. Vieira, C.N. Elias, H.P. Lopes, E.J.L. Moreira and L.C. Souza, A NiTi rotary instrument manufactured by twisting: morphology and mechanical properties, Dental Press Endod. 1, 21-27 (2011).

R.S. de Biasi and M.L.N. Grillo, Electron magnetic resonance investigation of chromium diffusion in yttria powders, Physica B 405, 1267-1268 (2010). DOI: 10.1016/j.physb.2009.11.062

T.P. Busquim, C.N. Elias, J.E. May, S.E. Kuri and P.A.P. Nascente, Titanium Oxide Layer on the Surface of Anodized Dental Implants, em Medical Device Materials V, ASM International, Russell Township, 2010, p. 60-68.

P.S.D. Ducos and C.N. Elias, Simulação do comportamento de mini-implantes para ancoragem ortodôntica, Rev. Bras. Implantodont. 16, 5-7 (2010)

C.N. Elias and L. Meirelles, Improving osseointegration of dental implants, Exp. Rev. Med. Devices 7, 241-256 (2010). DOI: 10.1586/erd.09.74

C.N. Elias and C. Santos, Próteses cerâmicas produzidas por usinagem CAD/CAM, Implant News 7, 183-190 (2010).

G.S. Guimarães, L.S. Morais, C.N. Elias, M.A. Meyers, L.R. Andrade, C.A. Muller and M. Muller, Sequential bone healing of immediately loaded mini-implants: histomorphometric and fluorescence analysis, AJODO 137, 80-90 (2010). DOI: 10.1016/j.ajodo.2007.12.035

R.B. Lehmann and C.N. Elias, Uso de simulação 3D no desenvolvimento de implantes e sistemas protéticos com pilares retos e angulados, Implant News 7, 113-120 (2010).

H.P. Lopes, C.N. Elias and J.F. Siqueira Jr., Instrumentos Endodônticos. ENDODONTIA - Biologia e Técnica. Rio de Janeiro: Editora Guanabara Koogan S.A., 2010, v. 01, p. 305-413.

H.P. Lopes, J.F. Siqueira Jr. and C.N. Elias, Preparo Químico-Mecânico dos Canais Radiculares. ENDODONTIA - Biologia e Técnica. Rio de Janeiro: Editora Guanabara Koogan S.A., 2010, v. 01, p. 415-479.

H.P. Lopes, C.N. Elias, J.F. Siqueira Jr. and M.M.D. Batista, Fratura dos Instrumentos Endodônticos: Fundamentos Teóricos e Práticos. ENDODONTIA - Biologia e Técnica. Rio de Janeiro: Editora Guanabara Koogan S.A., 2010, v. 01, p. 481-505.

H.P. Lopes, J.F. Siqueira Jr., C.N. Elias and M.A.R. Prado, Acidentes and Complicações em Endodontia. ENDODONTIA - Biologia e Técnica. Rio de Janeiro: Editora Guanabara Koogan S.A., 2010, v. 01, p. 507-530.

H.P. Lopes, J.F. Siqueira Jr. and C.N. Elias, Substâncias Químicas Empregadas no Preparo dos Canais Radiculares. ENDODONTIA - Biologia e Técnica. Rio de Janeiro: Editora Guanabara Koogan S.A., 2010, v.01, p. 531-571.

H.P. Lopes, J.F. Siqueira Jr., C.N. Elias and I.N. Rôças, Retratamento Endodôntico. ENDODONTIA - Biologia e Técnica. Rio de Janeiro: Editora Guanabara Koogan S.A., 2010, v. 01, p. 691-737.

H.P. Lopes, C.N. Elias and E.J.L. Moreira, Estudo comparativo da resistência em flexão de instrumentos endodônticos de NiTi mecanizados, Rev. Ondontol. Bras. Cent. 18, 48-50 (2010).

M. Marquezan, T.C.L. Lau, E.F. Sant'Anna, A.C.O. Ruellas and C.N. Elias, Shear bond strengths of orthodontic brackets with a new LED cluster curing light, J. Orthod. 37, 37-42 (2010). DOI: 10.1179/14653121042858

F.A. Rocha and C.N. Elias, Influência da técnica cirúrgica e forma do implante na estabilidade primária, Rev. Ondontol. Bras. Cent. 18, 26-29 (2010).

J.F. Siqueira Jr., H.P. Lopes and C.N. Elias, Obturação dos Canais Radiculares - Princípios and Técnica de Compactação Lateral. ENDODONTIA - Biologia e Técnica. Rio de Janeiro: Editora Guanabara Koogan S.A., 2010, v. 01, p. 641-670.

S.M. Souza, D.M. Trichês, J.C. de Lima, T.A. Grandi and R.S. de Biasi, Structural, optical and photoacoustic study of Sb2Te3 prepared by mechanical alloying, Physica B 405, 2807-2814 (2010). DOI: 10.1016/j.physb.2010.04.003

D.M. Trichês, S.M. Souza, C.M. Poffo, J.C. de Lima, T.A. Grandi and R.S. de Biasi, Structural instability and photoacoustic study of AlSb prepared by mechanical alloying, J. Alloys Comp. 505, 762-767 (2010). DOI: 10.1016/j.jallcom.2010.06.137

 

- Papers 1972-2009 -

Fim do conteúdo da página